three-phase motor, IE1

RN 200a8

Specification

Rated output: 15 kW
Speed: 740 rpm (8-pole)
Supply: 230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
Current at 400 V: 30 A
Efficiency: 91.1%, IE1
Power factor: 0.82
Starting current: 6.7 × rated
Torque: 194 Nm
Frame: IEC 200
Shaft end: 55 × 110 mm
Large flange (B5): FF350
Small flange (B14): None for this frame
Weight (B3): 175 kg

No pump here has this motor as its first match.

For an IEC 200 frame with a 55 mm shaft, bolting to the large flange (B5). Pick the one made for your pump series.

Part number	Description	For pump series
NK03	Udor motor flange NK03, IEC 200 B3/B5, up to 37 kW	NK, NKS, NH
VX02	Udor motor flange VX02, IEC 200 B3/B5, up to 37 kW	PENTA, VX, VXS, VH, VY
9.853-336.0	Hawk flexible coupling, IEC 200, 55 mm motor to 30 mm pump	MXT, MXT High Temperature, MPX 350, MPX 500, MXT Chemical, MPX Heavy Duty, MXT Stainless Steel Chemical, MXT High Flow

Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.

KNL30 contactors, rated 15 kW AC-3 at 400 V

Coil	Type	Iskra code
12 V AC	KNL30-00	030050915000
24 V AC B7	KNL30-00	030050690000
42 V AC D7	KNL30-00	030050691000
48 V AC E7	KNL30-00	030050692000
110-125 V AC F7	KNL30-00	030050693000
220-240 V AC M7	KNL30-00	030050471000
380-415 V AC Q7	KNL30-00	030050694000
440-460 V AC R7	KNL30-00	030050923000
480-520 V AC S7	KNL30-00	030050695000
12 V DC JD	KNL30G-00	030052514000

Set to the motor's full-load current, 30 A.