single-phase motor, 230 V

RNM 90Sb2

Specification

Rated output: 1.5 kW
Speed: 2860 rpm (2-pole)
Supply: 230 V 50 Hz, single-phase. Also made for 240, 220, 120 and 110 V at 50 or 60 Hz to order.
Current at 230 V: 10.2 A
Run capacitor: 45 µF
Efficiency: 68%
Power factor: 0.97
Starting current: 3.6 × rated
Torque: 5 Nm
Frame: IEC 90S
Shaft end: 24 × 50 mm
Large flange (B5): FF165
Small flange (B14): FT115
Weight (B3): 16.5 kg

Pumps rated at this motor's speed that need no more than 1.5 kW, where this is the smallest motor that does the job.

For an IEC 90 frame with a 24 mm shaft, bolting to the small flange (B14). Pick the one made for your pump series.

Part number	Description	For pump series
1.099-528.0	Hawk motor flange, IEC 90 B14	NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical
1.099-534.0	Hawk motor flange, IEC 90 B14	CHS 120
P04	Udor motor flange P04, IEC 90 B3/B14, up to 1.5 kW	PN, PS
ZF070	Interpump motor flange, IEC 90 B14	E1, SS1, 44, 58VHT, E2, C2W, 50 and 51
1.099-542.0	Hawk flexible coupling, IEC 90, 24 mm motor to 24 mm pump	NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical, CHD 200, CHS 120
1.099-544.0	Hawk flexible coupling, IEC 90, 24 mm motor to 24 mm pump	NMT, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NMT - Car Wash Heavy Duty, NMT Chemical, NMT Stainless Steel Chemical
ZG070	Interpump flexible coupling, IEC 90, 24 mm motor to 24 mm pump	E1, SS1, 44, 58VHT, E2, C2W and 50
ZGWW75	Interpump flexible coupling, IEC 90, 24 mm motor to 24 mm pump	51

The Iskra parts here are for three-phase starters at 400 V. A single-phase motor needs a single-phase starter, with protection set to 10.2 A.