NP11 plunger pump
NP11/7-220MN
Part number 00.7154
- 6.8Flow, l/min
- 220Pressure, bar
- 1450Speed, rpm
- 3Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 6.8 l/min
- Pressure
- 220 bar
- Speed
- 1450 rpm
- Absorbed power
- 3 kW
- Max water temperature
- 60 °C
- Plunger
- 12 mm
- Shaft
- Hollow
- Weight
- 6.3 kg
Kits
No kits are listed for this model. A supplier can look them up from the model NP11/7-220MN.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model NP11/7-220MN and part number 00.7154.
Motor
This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 3 kW.
Flange
None needed: the pump fits straight onto a hollow-shaft motor.
Coupling
None needed: the pump fits straight onto a hollow-shaft motor.
Other Speck NP11 pumps
NP11/1-220MINP11/1-220MNNP11/1-220MVNP11/3-220MINP11/3-220MVNP11/5-220MINP11/5-220MNNP11/5-220MVNP11/7-220MINP11/7-220MV