NP16 plunger pump
NP16/13-280
Part number 00.4939
- 14.1Flow, l/min
- 280Pressure, bar
- 1725Speed, rpm
- 7.8Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 14.1 l/min
- Pressure
- 280 bar
- Speed
- 1725 rpm
- Absorbed power
- 7.8 kW
- Max water temperature
- 60 °C
- Plunger
- 16 mm
- Shaft
- Solid
- Weight
- 7.3 kg
Kits
No kits are listed for this model. A supplier can look them up from the model NP16/13-280.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model NP16/13-280 and part number 00.4939.
Motor
Rated at 1725 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 7.8 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160Ma4 | 11 | 1475 | IEC 160M | IE3 | 22.4 | |
| RN 160Ma4 | 11 | 1450 | IEC 160M | IE1 | 22.4 | |
| RN 132Mb4 uprated | 9.2 | 1440 | IEC 132M | IE1 | 19.2 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Mb4) No Speck flange listed for this motor.
- IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft No Speck coupling listed: you need one for a 38 mm motor shaft to the pump shaft.
- IEC 160, 42 mm motor shaft No Speck coupling listed: you need one for a 42 mm motor shaft to the pump shaft.
Other Speck NP16 pumps
NP16/9-280NP16/13-220NP16/14-210NP16/15-210NP16/15-210 nickel-platedNP16/18-140NP16/18-140 nickel-platedNP16/21-140NP16/21-140 nickel-plated