NP30 plunger pump
NP30/125-120G
Part number 00.7100-2
- 125Flow, l/min
- 120Pressure, bar
- 1450Speed, rpm
- 29.5Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 125 l/min
- Pressure
- 120 bar
- Speed
- 1450 rpm
- Absorbed power
- 29.5 kW
- Max water temperature
- 40 °C
- Plunger
- 40 mm
- Shaft
- Solid
- Weight
- 41.5 kg
Kits
No kits are listed for this model. A supplier can look them up from the model NP30/125-120G.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model NP30/125-120G and part number 00.7100-2.
Motor
A 4-pole motor of at least 29.5 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200a4 | 30 | 1475 | IEC 200 | IE1 | 57 | |
| RN 180Lb4 uprated | 30 | 1465 | IEC 180L | IE1 | 58 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 180, 48 mm shaft (RN 180Lb4) No Speck flange listed for this motor.
- IEC 200, 55 mm shaft (RN 200a4) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 180, 48 mm motor shaft No Speck coupling listed: you need one for a 48 mm motor shaft to the pump shaft.
- IEC 200, 55 mm motor shaft No Speck coupling listed: you need one for a 55 mm motor shaft to the pump shaft.
Other Speck NP30 pumps
NP30/30-500NP30/90-150NP30/100-120NP30/125-120NP30/125-120HNP30/140-100NP30/140-100G