P11 plunger pump
P11/3-200
Part number 00.4100
- 3.1Flow, l/min
- 200Pressure, bar
- 1420Speed, rpm
- 1.3Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 3.1 l/min
- Pressure
- 200 bar
- Speed
- 1420 rpm
- Absorbed power
- 1.3 kW
- Max water temperature
- 70 °C
- Plunger
- 12 mm
- Shaft
- Solid
- Weight
- 6.5 kg
Kits
No kits are listed for this model. A supplier can look them up from the model P11/3-200.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model P11/3-200 and part number 00.4100.
Motor
A 4-pole motor of at least 1.3 kW drives this pump at 1420 rpm. Single-phase motors are listed last, for a 230 V supply.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 90La4 | 1.5 | 1430 | IEC 90L | IE3 | 3.6 | |
| RN 90La4 | 1.5 | 1410 | IEC 90L | IE1 | 3.6 | |
| RNM 90La4 | 1.5 | 1410 | IEC 90L | Single-phase | 10.5 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 90, 24 mm shaft (RNE 90La4, RN 90La4, RNM 90La4) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 90, 24 mm motor shaft No Speck coupling listed: you need one for a 24 mm motor shaft to the pump shaft.