P21 plunger pump
P21/23-130S
Part number 00.1647
- 23.1Flow, l/min
- 130Pressure, bar
- 1420Speed, rpm
- 5.9Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 23.1 l/min
- Pressure
- 130 bar
- Speed
- 1420 rpm
- Absorbed power
- 5.9 kW
- Max water temperature
- 70 °C
- Plunger
- 20 mm
- Shaft
- Solid
- Weight
- 8.5 kg
Kits
No kits are listed for this model. A supplier can look them up from the model P21/23-130S.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model P21/23-130S and part number 00.1647.
Motor
A 4-pole motor of at least 5.9 kW drives this pump at 1420 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Ma4 | 7.5 | 1465 | IEC 132M | IE3 | 15.3 | |
| RN 132Ma4 | 7.5 | 1440 | IEC 132M | IE1 | 15.3 | |
| RN 112c4 uprated | 6.3 | 1420 | IEC 112 | IE1 | 12.5 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112c4) No Speck flange listed for this motor.
- IEC 132, 38 mm shaft (RNE 132Ma4, RN 132Ma4) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft No Speck coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
- IEC 132, 38 mm motor shaft No Speck coupling listed: you need one for a 38 mm motor shaft to the pump shaft.
Other Speck P21 pumps
P21/3-500P21/5-450P21/7-400P21/15-160P21/15-160SP21/16-200P21/18-130P21/18-130SP21/19-160P21/23-130