P30 plunger pump
P30/43-130
Part number 00.0742
- 42.5Flow, l/min
- 130Pressure, bar
- 1420Speed, rpm
- 11Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 42.5 l/min
- Pressure
- 130 bar
- Speed
- 1420 rpm
- Absorbed power
- 11 kW
- Max water temperature
- 70 °C
- Plunger
- 26 mm
- Shaft
- Solid
- Weight
- 14.2 kg
Kits
No kits are listed for this model. A supplier can look them up from the model P30/43-130.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model P30/43-130 and part number 00.0742.
Motor
A 4-pole motor of at least 11 kW drives this pump at 1420 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160Ma4 | 11 | 1475 | IEC 160M | IE3 | 22.4 | |
| RN 160Ma4 | 11 | 1450 | IEC 160M | IE1 | 22.4 | |
| RN 132Mc4 uprated | 11 | 1430 | IEC 132M | IE1 | 24 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Mc4) No Speck flange listed for this motor.
- IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft No Speck coupling listed: you need one for a 38 mm motor shaft to the pump shaft.
- IEC 160, 42 mm motor shaft No Speck coupling listed: you need one for a 42 mm motor shaft to the pump shaft.