P41 plunger pump
P41/70-110RE
Part number 00.6058
- 67.7Flow, l/min
- 110Pressure, bar
- 1100Speed, rpm
- 15.2Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 67.7 l/min
- Pressure
- 110 bar
- Speed
- 1100 rpm
- Absorbed power
- 15.2 kW
- Max water temperature
- 70 °C
- Plunger
- 30 mm
- Shaft
- Solid
- Weight
- 31 kg
Kits
No kits are listed for this model. A supplier can look them up from the model P41/70-110RE.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model P41/70-110RE and part number 00.6058.
Motor
Rated at 1100 rpm, the speed of a 6-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 15.2 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200a6 | 18.5 | 985 | IEC 200 | IE1 | 38 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 200, 55 mm shaft (RN 200a6) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 200, 55 mm motor shaft No Speck coupling listed: you need one for a 55 mm motor shaft to the pump shaft.
Other Speck P41 pumps
P41/33-250P41/48-180P41/51-130P41/58-110P41/58-110DP41/58-110REP41/58-110REDP41/58-110SP41/70-110P41/70-110DP41/70-110REDP41/70-110REDKP41/70-110S