P45 plunger pump
P45/120-80
Part number 00.5593
- 123.1Flow, l/min
- 80Pressure, bar
- 1000Speed, rpm
- 20.1Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 123.1 l/min
- Pressure
- 80 bar
- Speed
- 1000 rpm
- Absorbed power
- 20.1 kW
- Max water temperature
- 40 °C
- Plunger
- 36 mm
- Shaft
- Solid
- Weight
- 52.5 kg
Kits
No kits are listed for this model. A supplier can look them up from the model P45/120-80.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model P45/120-80 and part number 00.5593.
Motor
A 6-pole motor of at least 20.1 kW drives this pump at 1000 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200b6 | 22 | 980 | IEC 200 | IE1 | 44 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 200, 55 mm shaft (RN 200b6) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 200, 55 mm motor shaft No Speck coupling listed: you need one for a 55 mm motor shaft to the pump shaft.
Other Speck P45 pumps
P45/37-400P45/46-320P45/60-250P45/60-250HP45/75-180P45/75-180HP45/85-160P45/85-160H