AWT plunger pump
AWTD 2.5/30 S
Part number 720055
- 9.4Flow, l/min
- 200Pressure, bar
- 1750Speed, rpm
- 3.6Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 9.4 l/min
- Pressure
- 200 bar
- Speed
- 1750 rpm
- Absorbed power
- 3.6 kW
- Shaft
- Solid, Ø24 mm
Exploded view (PDF, Udor)Dimensions (PDF, Udor)Data sheet (PDF, Udor)
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2 | Valve kit |
High pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 214 | High pressure seal kit |
Low pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 215 | Low pressure seal kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 229 | Plunger kit |
Parts list
The parts that come in this pump's service kits, by Udor part number.
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 3.6 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 112a4 | 4 | 1450 | IEC 112 | IE3 | 8.2 | |
| RN 112a4 | 4 | 1430 | IEC 112 | IE1 | 8.5 | |
| RN 100c4 uprated | 4 | 1405 | IEC 100 | IE1 | 9.1 | |
| RNM 112d4 | 4 | 1400 | IEC 112 | Single-phase | 22 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 100, 28 mm motor shaft No Udor coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.
- IEC 112, 28 mm motor shaft No Udor coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.
Gearbox for engine drive
Other Udor AWT pumps
AWTC 09/20 SAWTC 10/20 SAWTC 11/20 SAWTC 12/20 SAWTC 14/20 SAWTC 15/20 SAWTD 3.0/30 SAWTD 3.5/30 SAWTD 4.0/30 S