PumpLookupPump and motor part numbers
Mains Units

BK plunger pump

BKD 5.0/36 S

Part number 909800

  • 18.2Flow, l/min
  • 250Pressure, bar
  • 1750Speed, rpm
  • 8.7Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Udor BK pump

Specification

Flow
18.2 l/min
Pressure
250 bar
Speed
1750 rpm
Absorbed power
8.7 kW
Shaft
Solid

Exploded view (PDF, Udor)Dimensions (PDF, Udor)Data sheet (PDF, Udor)

Kits

High pressure seals1

Part numberDescriptionPer pumpSuppliers
KIT 28High pressure seal kit 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 30Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 206Plunger kit 

Low pressure seals1

Part numberDescriptionPer pumpSuppliers
KIT 208Low pressure seal kit 

Parts list

The parts that come in this pump's service kits, by Udor part number.

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 8.7 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160Ma4 111475IEC 160MIE322.4  
RN 160Ma4 111450IEC 160MIE122.4  
RN 132Mb4 uprated 9.21440IEC 132MIE119.2  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 132, 38 mm shaft (RN 132Mb4) BC10
  • IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Udor flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 132, 38 mm motor shaft No Udor coupling listed: you need one for a 38 mm motor shaft to the pump shaft.
  • IEC 160, 42 mm motor shaft No Udor coupling listed: you need one for a 42 mm motor shaft to the pump shaft.

Gearbox for engine drive

Other Udor BK pumps

BKC 13/30 SBKC 15/25 SBKC 15/30 SBKC 15/30 T MIBKC 18/25 SBKC 21/25 SBKC 21/25 T MIBKD 4.0/44 SBKL 4.0/36 WBKL 4.0/44 WBKL 5.0/36 W