C plunger pump

CD 12.0/22 S

Part number 900700

45.5Flow, l/min
150Pressure, bar
1750Speed, rpm
13Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Specification

Flow: 45.5 l/min
Pressure: 150 bar
Speed: 1750 rpm
Absorbed power: 13 kW
Shaft: Solid, Ø24 mm

Exploded view (PDF, Udor)Dimensions (PDF, Udor)Data sheet (PDF, Udor)

Kits

Valves1

Part number	Description	Per pump	Suppliers
KIT 3	Valve kit

High pressure seals1

Part number	Description	Per pump	Suppliers
KIT 11	High pressure seal kit

Low pressure seals1

Part number	Description	Per pump	Suppliers
KIT 18	Low pressure seal kit

Plungers1

Part number	Description	Per pump	Suppliers
KIT 38	Plunger kit

Parts list

The parts that come in this pump's service kits, by Udor part number.

Part number	Qty in kit	Kit
110164	6	KIT 3
600627	6	KIT 3
063506	3	KIT 11
1101A9	3	KIT 11
603030	3	KIT 11
002330	3	KIT 18
1101A9	3	KIT 18
122114	3	KIT 18
002323	3	KIT 38
010212	3	KIT 38
1101A8	3	KIT 38
140333	3	KIT 38
140343	3	KIT 38

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 13 kW. Order the one you pick wound for 60 Hz and your supply voltage.

Motor	kW	rpm	Frame	Class	A at 400 V	Suppliers
RNE 160La4	15	1465	IEC 160L	IE3	30.5
RN 160La4	15	1450	IEC 160L	IE1	30

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) C14

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

IEC 160, 42 mm motor shaft No Udor coupling listed: you need one for a 42 mm motor shaft to 24 mm pump shaft.