CK plunger pump

CKD 7.5/44 S

Part number 291900

28.4Flow, l/min
300Pressure, bar
1750Speed, rpm
16.3Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Specification

Flow: 28.4 l/min
Pressure: 300 bar
Speed: 1750 rpm
Absorbed power: 16.3 kW
Shaft: Solid, Ø24 mm

Exploded view (PDF, Udor)Dimensions (PDF, Udor)Data sheet (PDF, Udor)

Kits

Valves1

Part number	Description	Per pump	Suppliers
KIT 3	Valve kit

Plungers1

Part number	Description	Per pump	Suppliers
KIT 6	Plunger kit

High pressure seals1

Part number	Description	Per pump	Suppliers
KIT 10	High pressure seal kit

Low pressure seals1

Part number	Description	Per pump	Suppliers
KIT 17	Low pressure seal kit

Parts list

The parts that come in this pump's service kits, by Udor part number.

Part number	Qty in kit	Kit
110164	6	KIT 3
600627	6	KIT 3
002323	3	KIT 6
010212	3	KIT 6
030141	3	KIT 6
1101A8	3	KIT 6
140333	3	KIT 6
063528	3	KIT 10
1101A9	3	KIT 10
603031	3	KIT 10
002329	3	KIT 17
1101A9	3	KIT 17
122113	3	KIT 17

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 16.3 kW. Order the one you pick wound for 60 Hz and your supply voltage.

Motor	kW	rpm	Frame	Class	A at 400 V	Suppliers
RN 180Ma4	18.5	1465	IEC 180M	IE1	37
RN 160Lb4 uprated	18.5	1420	IEC 160L	IE1	38

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

IEC 160, 42 mm shaft (RN 160Lb4) No Udor flange listed for this motor.
IEC 180, 48 mm shaft (RN 180Ma4) C15

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

IEC 160, 42 mm motor shaft No Udor coupling listed: you need one for a 42 mm motor shaft to 24 mm pump shaft.
IEC 180, 48 mm motor shaft No Udor coupling listed: you need one for a 48 mm motor shaft to 24 mm pump shaft.