CR plunger pump
CR 8.1000
Part number 28879
- 8Flow, l/min
- 1000Pressure, bar
- 1000Speed, rpm
- 15Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 8 l/min
- Pressure
- 1000 bar
- Speed
- 1000 rpm
- Absorbed power
- 15 kW
- Weight
- 62 kg
Kits
No kits are listed for this model. A supplier can look them up from the model CR 8.1000.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model CR 8.1000 and part number 28879.
Motor
A 6-pole motor of at least 15 kW drives this pump at 1000 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 180La6 | 15 | 970 | IEC 180L | IE1 | 32 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 180, 48 mm shaft (RN 180La6) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 180, 48 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 48 mm motor shaft to the pump shaft.