three-phase motor, IE1

RN 180La6

Specification

Rated output: 15 kW
Speed: 970 rpm (6-pole)
Supply: 230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
Current at 400 V: 32 A
Efficiency: 90.8%, IE1
Power factor: 0.78
Starting current: 6.7 × rated
Torque: 148 Nm
Frame: IEC 180L
Shaft end: 48 × 110 mm
Large flange (B5): FF300
Small flange (B14): None for this frame
Weight (B3): 151 kg

Pumps rated at this motor's speed that need no more than 15 kW, where this is the smallest motor that does the job.

For an IEC 180 frame with a 48 mm shaft, bolting to the large flange (B5). Pick the one made for your pump series.

Part number	Description	For pump series
C15	Udor motor flange C15, IEC 180 B3/B5, up to 22 kW	C, CS, CWT, CK, CX, CH
NK02	Udor motor flange NK02, IEC 180 B3/B5, up to 22 kW	NK, NKS, NH
VX01	Udor motor flange VX01, IEC 180 B3/B5, up to 22 kW	PENTA, VX, VXS, VH, VY
1.905-879.0	Hawk flexible coupling, IEC 180, 48 mm motor to 30 mm pump	MXT, MXT High Temperature, MPX 350, MPX 500, MXT Chemical, MPX Heavy Duty, MXT Stainless Steel Chemical, MXT High Flow

Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.

KNL30 contactors, rated 15 kW AC-3 at 400 V

Coil	Type	Iskra code
12 V AC	KNL30-00	030050915000
24 V AC B7	KNL30-00	030050690000
42 V AC D7	KNL30-00	030050691000
48 V AC E7	KNL30-00	030050692000
110-125 V AC F7	KNL30-00	030050693000
220-240 V AC M7	KNL30-00	030050471000
380-415 V AC Q7	KNL30-00	030050694000
440-460 V AC R7	KNL30-00	030050923000
480-520 V AC S7	KNL30-00	030050695000
12 V DC JD	KNL30G-00	030052514000

Set to the motor's full-load current, 32 A.