three-phase motor, IE1
RN 160Ma6
- 7.5Power, kW
- 965Speed, rpm
- 6Poles
- 160MIEC frame
- 18.1Amps at 400 V
Specification
- Rated output
- 7.5 kW
- Speed
- 965 rpm (6-pole)
- Supply
- 230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
- Current at 400 V
- 18.1 A
- Efficiency
- 84%, IE1
- Power factor
- 0.75
- Starting current
- 5.7 × rated
- Torque
- 74 Nm
- Frame
- IEC 160M
- Shaft end
- 42 × 110 mm
- Large flange (B5)
- FF300
- Small flange (B14)
- None for this frame
- Weight (B3)
- 80 kg
Pumps it drives
Pumps rated at this motor's speed that need no more than 7.5 kW, where this is the smallest motor that does the job.
Hawk NMT 4
NMT1220SLNMT1220SRNMT1520SLNMT1520SR
Hawk NMT Car Wash 4
NMT1220SCWLNMT1220SCWRNMT1520SCWLNMT1520SCWR
Hawk NMT High Temperature 2
Hawk NMT nickel-plated 4
NMT1220SLNNMT1220SRNNMT1520SLNNMT1520SRN
Udor BCW 3
BCWB 11/20 SBCWB 13/20 SBCWB 15/20 S
Interpump 47 series 5
Interpump 59 E3 series 4
Mazzoni MMD 2
MMD15250L (1000 rpm)MMD15250R (1000 rpm)
Mazzoni MMD-CW 2
MMD-CW15250L (1000 rpm)MMD-CW15250R (1000 rpm)
Mazzoni MMX 2
MMX15200L (1000 rpm)MMX15200R (1000 rpm)
Mazzoni TMM high temperature 2
TMM15200L (1000 rpm)TMM15200R (1000 rpm)
Cat Pumps 5 Frame 4
Cat Pumps 5CP 2
Cat Pumps 7 Frame 1
Annovi Reverberi CWX 1
Annovi Reverberi XWF 3
XWF 26.12 N code 21051XWF 26.15 N code 21052XWF 30.10 N code 21054
Annovi Reverberi XWL-SS 1
Comet RWN 2
Flanges and couplings
For an IEC 160 frame with a 42 mm shaft, bolting to the large flange (B5). Pick the one made for your pump series.
| Part number | Description | For pump series |
|---|---|---|
| 1.099-532.0 | Hawk motor flange, IEC 160 B5 | XLTI, XLTI High Temperature, PXI 350, XXT, XLTI Atex, PXI 500, XXT High Temperature, XLTI Chemical, XLTI Stainless Steel Chemical, PXI Heavy Duty |
| C14 | Udor motor flange C14, IEC 160 B3/B5, up to 15 kW | C, CS, CWT, CK, CX, CH |
| NK01 | Udor motor flange NK01, IEC 160 B3/B5, up to 15 kW | NK, NKS, NH |
| 1.905-878.0 | Hawk flexible coupling, IEC 160, 42 mm motor to 30 mm pump | MXT, MXT High Temperature, MPX 350, MPX 500, MXT Chemical, MPX Heavy Duty, MXT Stainless Steel Chemical, MXT High Flow |
| 1.905-890.0 | Hawk flexible coupling, IEC 160, 42 mm motor to 24 mm pump | XLTI, XLTI High Temperature, PXI 350, XXT, XLTI Atex, PXI 500, XXT High Temperature, XLTI Chemical, XLTI Stainless Steel Chemical, PXI Heavy Duty |
| ZG66160 | Interpump flexible coupling, IEC 160, 42 mm motor shaft | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
Starter
Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.
Contactor
KNL16 contactors, rated 7.5 kW AC-3 at 400 V
| Coil | Type | Iskra code | Suppliers |
|---|---|---|---|
| 12 V AC | KNL16-10 1NO | 030050678000 | |
| 24 V AC B7 | KNL16-01 1NC | 030050665000 | |
| 24 V AC B7 | KNL16-10 1NO | 030050666000 | |
| 42 V AC D7 | KNL16-01 1NC | 030050667000 | |
| 42 V AC D7 | KNL16-10 1NO | 030050668000 | |
| 48 V AC E7 | KNL16-01 1NC | 030050669000 | |
| 48 V AC E7 | KNL16-10 1NO | 030050670000 | |
| 110-125 V AC F7 | KNL16-01 1NC | 030050671000 | |
| 110-125 V AC F7 | KNL16-10 1NO | 030050672000 | |
| 220-240 V AC M7 | KNL16-01 1NC | 030050673000 | |
| 220-240 V AC M7 | KNL16-10 1NO | 030050489000 | |
| 380-415 V AC Q7 | KNL16-01 1NC | 030050674000 | |
| 380-415 V AC Q7 | KNL16-10 1NO | 030050675000 | |
| 440-460 V AC R7 | KNL16-10 1NO | 030050921000 | |
| 480-520 V AC S7 | KNL16-01 1NC | 030050676000 | |
| 480-520 V AC S7 | KNL16-10 1NO | 030050677000 |
Overload protection
Set to the motor's full-load current, 18.1 A.
Other motors in this range
RN 63a6RN 63b6RN 71a6RN 71b6RN 71c6RN 80a6RN 80b6RN 90La6RN 90Sa6RN 100a6RN 100b6RN 112a6RN 112b6RN 132Ma6RN 132Mb6RN 132Sa6RN 160La6RN 180La6RN 200a6RN 200b6