PumpLookupPump and motor part numbers
Mains Units

5 Frame plunger pump

310S

  • 15.1Flow, l/min
  • 152Pressure, bar
  • 950Speed, rpm
  • 4.49Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Cat Pumps 5 Frame pump

Specification

Flow
15.1 l/min
Pressure
152 bar
Speed
950 rpm
Absorbed power
4.49 kW
Plunger
20 mm
Shaft
Solid, Ø20 mm
Weight
9 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits4

Part numberDescriptionPer pumpSuppliers
30623Seal kit, NBR (STD)1 
31163Seal kit, EPDM (.0220)1 
33623Seal kit, HT (.3000)1 
34155Seal kit, FPM (.0110)1 

Valves3

Part numberDescriptionPer pumpSuppliers
30821Valve kit, NBR (STD)2 
31162Valve kit, EPDM (.0220)2 
31821Valve kit, FPM (.0110)2 

Exploded view

Cat Pumps exploded view of the 5 Frame pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 125824 Screw, HHC, Sems (M6 x 16)8
8 43344 Cover, Bearing
10 43343 O-Ring, Bearing Cover2
11 43222 Seal, Oil, Crankshaft
15 14480 Bearing, Ball2
20 45883 Rod, Connecting Assembly3
25 43342 Crankshaft, Dual-End (M18)1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Filler Cap1
37 92241 Gauge, Oil, Bubble with Gasket1
38 44428 Gasket, Flat, Oil Gauge1
40 126541 Screw, HHC, Sems (M6 x 20)4
48 25625 Plug, Drain (1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug1
50 48772 Cover, Rear1
51 48773 O-Ring, Rear Cover1
53 48769 Crankcase1
56 43355 Pan, Oil1
64 43351 Pin, Crosshead3
65 43365 Rod, Plunger3
70 43228 Seal, Oil, Crankcase3
75 43328 Slinger, Barrier3
88 45697 Washer, Keyhole (M18 x 10)3
90 43367 Plunger (M20 x 72)3
96 43235 Backup Ring, Plunger Retainer3
97 17399 O-Ring, Plunger Retainer3
98 45891 Gasket3
99 104360 Retainer, Plunger with Stud3
100 45688 Retainer, Seal, 2-Piece3
101 43302 Wick, Long Tab3
106 43305 Seal, Low-Pressure with S-Spring3
120 45679 Case, Seal3
121 14200 O-Ring, Seal Case3
125 43307 Seal, High-Pressure with S-Support3
139 22179 Plug, Inlet (1/2" NPT[M])1
162 48361 Backup Ring, Seat6
163 43358 O-Ring, Seat6
164 43725 Seat6
166 43723 Valve6
167 43750 Spring, Valve6
168 44565 Retainer, Valve Spring6
172 49382 O-Ring, Valve Plug6
174 43849 Plug, Valve6
185 46278 Head, Manifold1
188 126520 Screw, HSH, Sems (M10 x 35)2

Motor

A 6-pole motor of at least 4.49 kW drives this pump at 950 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 160Ma6 7.5965IEC 160MIE118.1  
RN 132Mb6 uprated 5.5960IEC 132MIE113.1  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 132, 38 mm shaft (RN 132Mb6) No Cat Pumps flange listed for this motor.
  • IEC 160, 42 mm shaft (RN 160Ma6) No Cat Pumps flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 132, 38 mm motor shaft No Cat Pumps coupling listed: you need one for a 38 mm motor shaft to 20 mm pump shaft.
  • IEC 160, 42 mm motor shaft No Cat Pumps coupling listed: you need one for a 42 mm motor shaft to 20 mm pump shaft.

Other Cat Pumps 5 Frame pumps

304545G1301310310B311317340340B340S341341G1347350350B350S351351G1357