5 Frame plunger pump
317
- 15.1Flow, l/min
- 103Pressure, bar
- 1190Speed, rpm
- 3.06Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 15.1 l/min
- Pressure
- 103 bar
- Speed
- 1190 rpm
- Absorbed power
- 3.06 kW
- Plunger
- 20 mm
- Shaft
- Solid, Ø20 mm
- Weight
- 9 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 31152 | Valve kit, NBR (STD) | 2 |
Seal kits1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 34153 | Seal kit, NBR (STD) | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 5 | 92538 | Screw, HHC Sems (M6 x 16) | 8 |
| 8 | 43344 | Cover, Bearing | |
| 10 | 43343 | O-Ring, Bearing Cover | 2 |
| 11 | 43222 | Seal, Oil, Crankshaft | |
| 15 | 14480 | Bearing, Ball | 2 |
| 20 | 45883 | Rod, Connecting Assembly | 3 |
| 25 | 43342 | Crankshaft, Dual-End (M18) | 1 |
| 32 | 43211 | Cap, Oil Filler | 1 |
| 33 | 14177 | O-Ring, Filler Cap | 1 |
| 37 | 92241 | Gauge, Oil, Bubble with Gasket | 1 |
| 38 | 44428 | Gasket, Flat, Oil Gauge | 1 |
| 40 | 92542 | Screw, HHC Sems (M6 x 20) | 4 |
| 48 | 25625 | Plug, Drain (1/4" x 19 BSP) | 1 |
| 49 | 23170 | O-Ring, Drain Plug | 1 |
| 50 | 48772 | Cover, Rear | 1 |
| 51 | 48773 | O-Ring, Rear Cover | 1 |
| 53 | 48769 | Crankcase | 1 |
| 56 | 43355 | Pan, Oil | 1 |
| 64 | 43351 | Pin, Crosshead | 3 |
| 65 | 45256 | Rod, Plunger | 3 |
| 70 | 43228 | Seal, Oil, Crankcase | 3 |
| 75 | 43328 | Slinger, Barrier | 3 |
| 88 | 45697 | Washer, Keyhole (M18 x M10) | 3 |
| 90 | 43367 | Plunger (M20 x 72) | 3 |
| 95 | 89653 | Stud, Plunger Retainer (M6 x 58) | 3 |
| 96 | 43235 | Backup Ring, Plunger Retainer | 3 |
| 97 | 17399 | O-Ring, Plunger Retainer | 3 |
| 98 | 44041 | Gasket | 3 |
| 99 | 44031 | Retainer, Plunger | 3 |
| 100 | 45688 | Retainer, Seal 2-Piece | 3 |
| 101 | 43302 | Wick, Long Tab | 3 |
| 106 | 44127 | Seal, Low-Pressure with SS-Spring | 3 |
| 120 | 45680 | Case, Seal | 3 |
| 121 | 14200 | O-Ring, Seal Case | 3 |
| 125 | 44649 | Seal, High-Pressure with SS-Support | 3 |
| 139 | 44563 | Plug, Inlet (1/2" NPT[M]) | 1 |
| 162 | 48361 | Backup Ring, Seat | 6 |
| 163 | 43358 | O-Ring, Seat | 6 |
| 164 | 44128 | Seat | 6 |
| 166 | 543669 | Valve | 6 |
| 167 | 44056 | Spring, Valve | 6 |
| 168 | 44565 | Retainer, Valve Spring | 6 |
| 171 | 44832 | Spring, Coil | 6 |
| 172 | 49382 | O-Ring, Valve Plug | 6 |
| 174 | 44833 | Plug, Valve | 6 |
| 185 | 44124 | Head Manifold | 1 |
| 186 | 15847 | Lockwasher (M10) | 2 |
| 188 | 87950 | Screw HSH (M10 x 35) | 2 |
Motor
Rated at 1190 rpm, the speed of a 6-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 3.06 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 132Ma6 | 4 | 950 | IEC 132M | IE1 | 9.7 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Ma6) No Cat Pumps flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft No Cat Pumps coupling listed: you need one for a 38 mm motor shaft to 20 mm pump shaft.
Other Cat Pumps 5 Frame pumps
304545G1301310310B310S311340340B340S341341G1347350350B350S351351G1357