5 Frame plunger pump
45
- 17Flow, l/min
- 241Pressure, bar
- 1645Speed, rpm
- 8.04Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 17 l/min
- Pressure
- 241 bar
- Speed
- 1645 rpm
- Absorbed power
- 8.04 kW
- Plunger
- 16 mm
- Shaft
- Solid, Ø20 mm
- Weight
- 9.5 kg
Kits
Seal kits3
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 30629 | Seal kit, NBR (STD) | 1 | |
| 31629 | Seal kit, HT (.3000) | 1 | |
| 76629 | Seal kit, FPM (.0110) | 1 |
Valves2
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 5 | 126542 | Screw, Sems HHC (M8 x 16) | 8 |
| 8 | 49685 | Cover, Bearing (M8) | 1 |
| 10 | 43343 | O-Ring, Bearing Cover | 2 |
| 11 | 43222 | Seal, Oil, Crankshaft | 1 |
| 15 | 14480 | Bearing, Ball | 2 |
| 20 | 45883 | Rod, Connecting Assembly | 3 |
| 25 | 45911 | Crankshaft, Single-End (M18) | 1 |
| 30 | 45953 | Cover, Blind Shaft (M8) | 1 |
| 32 | 44666 | Cap, Oil Filler, Domed | 1 |
| 33 | 14177 | O-Ring, Oil Filler Cap | 1 |
| 37 | 92241 | Gauge, Oil, Bubble with Gasket | 1 |
| 38 | 44428 | Gasket, Flat, Oil Gauge | 1 |
| 40 | 125824 | Screw, Sems HHC (M6 x 16) | 4 |
| 48 | 25625 | Plug, Drain (1/4" x 19 BSP) | 1 |
| 49 | 23170 | O-Ring, Drain Plug | 1 |
| 50 | 48772 | Cover, Rear | 1 |
| 51 | 48773 | O-Ring, Rear Cover | 1 |
| 53 | 129811 | Crankcase (M8) | 1 |
| 64 | 43351 | Pin, Crosshead | 3 |
| 65 | 45908 | Rod, Plunger | 3 |
| 70 | 43228 | Seal, Oil, Crankcase | 3 |
| 75 | 43328 | Slinger, Barrier | 3 |
| 88 | 45697 | Washer, Keyhole (M18 x M10) | 3 |
| 90 | 45783 | Plunger (M16 x 72) | 3 |
| 95 | 126558 | Stud, Plunger Retainer (M6 x 64.5) | 3 |
| 96 | 43235 | Backup Ring, Plunger Retainer | 3 |
| 97 | 17399 | O-Ring, Plunger Retainer | 3 |
| 98 | 45891 | Gasket, Plunger Retainer | 3 |
| 99 | 46504 | Retainer, Plunger (M6) | 3 |
| 100 | 45784 | Retainer, Seal, 2-Piece | 3 |
| 106 | 43316 | Seal, Low-Pressure with S-Spring | 3 |
| 120 | 45789 | Case, Seal | 3 |
| 121 | 14200 | O-Ring, Seal Case | 3 |
| 126 | 43320 | Adapter, Female | 3 |
| 127 | 43319 | V-Packing | 6 |
| 128 | 43318 | Adapter, Male | 3 |
| 163 | 17547 | O-Ring, Valve Seat | 6 |
| 164 | 45790 | Seat | 6 |
| 166 | 46429 | Valve | 6 |
| 167 | 43750 | Spring | 6 |
| 168 | 44565 | Retainer, Spring | 6 |
| 172 | 142807 | O-Ring, Valve Plug | 6 |
| 173 | 48365 | Backup Ring, Valve Plug | 6 |
| 174 | 45900 | Plug, Valve | 6 |
| 185 | 45907 | Head, Manifold | 1 |
| 188 | 126520 | Screw, Sems HSH (M10 x 35) | 2 |
| 500 | 8065 | Gearbox 1" Shaft (See Individual Data Sheet) | 1 |
Motor
Rated at 1645 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 8.04 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160Ma4 | 11 | 1475 | IEC 160M | IE3 | 22.4 | |
| RN 160Ma4 | 11 | 1450 | IEC 160M | IE1 | 22.4 | |
| RN 132Mb4 uprated | 9.2 | 1440 | IEC 132M | IE1 | 19.2 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Mb4) No Cat Pumps flange listed for this motor.
- IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Cat Pumps flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft No Cat Pumps coupling listed: you need one for a 38 mm motor shaft to 20 mm pump shaft.
- IEC 160, 42 mm motor shaft No Cat Pumps coupling listed: you need one for a 42 mm motor shaft to 20 mm pump shaft.
Other Cat Pumps 5 Frame pumps
3045G1301310310B310S311317340340B340S341341G1347350350B350S351351G1357