PumpLookupPump and motor part numbers
Mains Units

HJRS plunger pump

HJRS 8.15 TSS EM

Part number 27163

  • 8Flow, l/min
  • 150Pressure, bar
  • 2800Speed, rpm
  • 2.2Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi HJRS pump

Specification

Flow
8 l/min
Pressure
150 bar
Speed
2800 rpm
Absorbed power
2.2 kW
Weight
17.8 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 43478Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 43479Plunger kit 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 43480Oil seal kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 43481Water seal kit 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 43482O-ring kit 

Exploded view

Annovi Reverberi exploded view of the HJRS pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 3800250 Screw TSEI M4x81
2 3800180 Knob1
3 3800190 Screw1
4 1980220 Plate1
5 2760410 Spring1
6 4140170 Piston1
7 2260100 O-ring Ø 6,02x2,621 KIT 43482
8 660190 O-ring Ø 6,07x1,781 KIT 43482
9 2760210 Ring1 KIT 43482
10 3800210 Piston guide1
11 740290 O-ring Ø 14x1,781 KIT 43482
12 820510 O-ring Ø 10,82x1,781 KIT 43482
13 3800230 Piston1
14 2841080 Seat1
15 1470210 O-ring Ø 9x12 KIT 43482
16 3700240 Hose tail Ø 81
17 480480 O-ring Ø 4,48x1,781 KIT 43482
18 1250280 Ball1
19 1560520 Spring1
20 2760230 Fitting 3/8”G1
21 2760270 O-ring Ø 12x11 KIT 43482
22 394280 O-ring Ø 12,42x1,781 KIT 43482
23 2761550 Injector Ø 1,71
23 2760240 Injector Ø 1,81
24 2760200 Spring1
25 2761511 Shutter1
26 2101770 O-ring Ø 4x2,51 KIT 43482
27 1345180 Screw TCEI M5x408
28 4140140 Washer8
29 4140650 Head brass1
30 3800200 Nut M16x11
31 3800240 Screw M3x41
32 3800310 Screw1
33 2760260 Plug 1/4” G1
34 2840130 Plug6
35 2849051 Complete valve6 KIT 43478
36 2841520 O-ring Ø 13,5x1,86 KIT 43482
37 2200141 Water seal Ø 126 KIT 43481
39 2840550 Bushing Ø 123
40 770590 O-ring Ø 21,95x1,783 KIT 43481
41 2841390 Bushing Ø 123
42 3700250 O-ring Ø 8x1,13 KIT 43482
43 2841800 Plug1
44 1683500 Oil seal3 KIT 43480
45 4140010 Pump body1
46 4140150 Cover1 KIT 43480
47 4140360 Ring2
49 4140110 Bearing1
50 4140210 Plug1
51 4140060 Piston Ø 123 KIT 43479
52 4140070 Pin3
53 4140080 Connecting-rod3
54 4140090 O-ring1 KIT 43480
55 4140270 Screw TE 5x84
56 4140030 Cover1
57 4140310 Shaft1
57 4140280 Shaft1
58 4140100 Bearing1
59 4140190 Ring1
60 4140200 Oil seal1 KIT 43480
61 1380520 Key1
62 4149222 Head assembly1
62 4149223 Head assembly1
63 1120681 O-ring Ø 3,39x1,781
64 1260820 O-ring Ø 1,78x1,781
65 4140480 Fitting1
66 2841800 Plug1
67 2029752 TSS box assembly1
68 4140420 Pin1
69 2260460 Spring1
70 2021650 Washer1
71 3740050 Ring1
72 600180 O-ring Ø 7,66x1,781
73 2022201 Fork1
74 3201960 Flange1
75 880280 Screw TCEI M6x184
76 1260780 Screw TCEI M5x254
78 1340340 Bearing1
79 1345180 Screw TCEI M5x404
80 1345140 Shield1
81 1340350 Seal1
82 1260300 Fan1
83 1341831 Box1
84 1261560 Screw4
85 1263520 Capacitor1
86 1982550 Clamp1
87 1342040 Fan cowling1
88 1340780 Gasket1
89 1340660 Gland1
90 1340640 Ring nut2
91 1340650 Gland1
92 1341840 Foot2
93 320350 Screw TE M6x124
94 550331 Washer4
95 45163 Motor1
95 45164 Motor1
96 1269100 Clamp1
97 3720750 O-ring Ø 4x11
98 3721210 Seat1
99 3720730 Plug1
100 1682800 O-ring Ø 6x1,51

Motor

A 2-pole motor of at least 2.2 kW drives this pump at 2800 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 90La2 2.22880IEC 90LIE34.6  
RN 90La2 2.22890IEC 90LIE14.7  
RNM 90Lb2 2.22820IEC 90LSingle-phase13.1 at 230 V  
RNM 100a2 2.22880IEC 100Single-phase14 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RNE 90La2, RN 90La2, RNM 90Lb2) No Annovi Reverberi flange listed for this motor.
  • IEC 100, 28 mm shaft (RNM 100a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.