PumpLookupPump and motor part numbers
Mains Units

RCA plunger pump

RCA 3.5G16 E + F8

Part number 23468

  • 13.2Flow, l/min
  • 110Pressure, bar
  • 1750Speed, rpm
  • 3Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi RCA pump

Specification

Flow
13.2 l/min
Pressure
110 bar
Speed
1750 rpm
Absorbed power
3 kW
Weight
5.5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2186Valve kit 

Other kits2

Part numberDescriptionPer pumpSuppliers
KIT 2745Support ring kit, Ø18 mm 
KIT 42470O-ring kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 42467Plunger kit, Ø18 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42469Water seal kit, Ø18 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 42474Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the RCA pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 3200110 Plug6
2 1200690 O-ring Ø 15,6x1,786 KIT 42470
3 2769050 Complete valve6 KIT 2186
4 800410 Screw TCEI M6x408
5 1381550 Washer8
6 3200020 Head1
7 180101 O-ring Ø 17,5x21 KIT 42470
8 820361 Plug 1/2" G brass1
9 740290 O-ring Ø 14x1,781 KIT 42470
10 1980740 Plug 3/8" G brass1
11 1780140 Ring Ø183 KIT 2745
12 1780720 Water seal Ø 183 KIT 42469
13 3200130 Piston guide Ø183
14 3200142 Gasket Ø 183 KIT 42469
15 3200260 Ring3 KIT 42469
16 770590 O-ring Ø 21,95x1,783 KIT 42469, KIT 42470
17 3200120 Piston guide Ø183
18 3200010 Pump body1
19 1780490 Bearing1
20 1260790 Ring1
21 1780550 Ring1
22 395081 O-ring Ø 47,30x2,621 KIT 42470
25 3200070 Support1
26 1200430 Screw TCEI M6x164
27 3201890 Plug1
28 1260110 Nut3
29 1260100 Washer3
30 1260210 Piston Ø 183 KIT 42467
31 1260091 Plate3
32 1260460 Oil seal3 KIT 42474
33 480480 O-ring Ø 4,48x1,783 KIT 42470
34 3200060 Piston3
35 3200040 Connecting-rod3
36 1780050 Pin3
37 2760280 O-ring Ø 101,27x2,621 KIT 42470
38 3200030 Cover1
39 820510 O-ring Ø 10,82x1,781 KIT 42470
40 880581 Plug 1/4" G1
41 3200220 Screw TCEI 6x164
44 1321190 Bearing1
49 3209200 Head assembly1
50 3201860 Ring Ø 51,8x0,51
63 480671 Oil seal1 KIT 42474
64 1320040 Flange1
65 1200430 Screw TCEI M6x164
67 3201230 Flange1
68 850850 Screw TCEI M6x304
73 1320060 Flange1
74 3209615 Oil level assembly1

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 3 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100b4 31440IEC 100IE36.8  
RN 100b4 31420IEC 100IE16.4  
RNM 100c4 31410IEC 100Single-phase17 at 230 V  
RNM 112c4 31415IEC 112Single-phase18.5 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RNE 100b4, RN 100b4, RNM 100c4) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNM 112c4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi RCA pumps

RCA 2.5G25 NRCA 2G22 E + F8RCA 3.5G25 NRCA 3G18 E + F8RCA 3G25 N