single-phase motor, 230 V
RNM 112c4
- 3Power, kW
- 1415Speed, rpm
- 4Poles
- 112IEC frame
- 18.5Amps at 230 V
Specification
- Rated output
- 3 kW
- Speed
- 1415 rpm (4-pole)
- Supply
- 230 V 50 Hz, single-phase. Also made for 240, 220, 120 and 110 V at 50 or 60 Hz to order.
- Current at 230 V
- 18.5 A
- Run capacitor
- 65 µF
- Efficiency
- 80%
- Power factor
- 0.88
- Starting current
- 2.7 × rated
- Torque
- 19.9 Nm
- Frame
- IEC 112
- Shaft end
- 28 × 60 mm
- Large flange (B5)
- FF215
- Small flange (B14)
- FT130
- Weight (B3)
- 30 kg
Pumps it drives
Pumps rated at this motor's speed that need no more than 3 kW, where this is the smallest motor that does the job.
Hawk NHDP 120 2
Hawk NHDP 120-C 2
Hawk NHDP 150 2
Hawk NHDP 150-C 2
Hawk NHDP 200-NEMA 2
Interpump 44 series 7
Interpump 51 series 1
Interpump 53 E1 series 3
Interpump 53 ET1 brass series 3
Interpump 58 E2 series 1
Mazzoni TPMD high temperature 1
Cat Pumps 3 Frame 2
Cat Pumps 3CP 1
Annovi Reverberi RC 2
Annovi Reverberi RC-SS 1
Annovi Reverberi RCA 2
RCA 3.5G16 E + F8RCA 3G18 E + F8
Annovi Reverberi RHW 1
Annovi Reverberi RK 2
RK 11.14 N code 20630RK 13.12 C
Annovi Reverberi RS 1
Annovi Reverberi XT 2
Annovi Reverberi XWL-SS 1
Comet LW 3
Comet LW-K 1
Comet LWS 1
Bertolini WBL 4
WBL 917WBL 1016WBL 1115WBL 1312
Bertolini WBS 2
Bertolini WML 1
Flanges and couplings
For an IEC 112 frame with a 28 mm shaft, bolting to the small flange (B14). Pick the one made for your pump series.
| Part number | Description | For pump series |
|---|---|---|
| 1.099-529.0 | Hawk motor flange, IEC 100/112 B14 | NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical |
| 1.099-530.0 | Hawk motor flange, IEC 100/112 B14 | NMT, NPM, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NPM Nickel-Plated, NLTI, NMT - Car Wash Heavy Duty, NMT Chemical, NMT Stainless Steel Chemical, CHD 200, CHS 120 |
| A08 | Udor motor flange A08, IEC 100/112 B3/B14, up to 4 kW | A, AK, AWT |
| BC04 | Udor motor flange BC04, IEC 100/112 B3/B14, up to 4 kW | B, BS, BCW, BWT, BK, C, CS, CWT, CK, CX, CH |
| P05 | Udor motor flange P05, IEC 100/112 B3/B14, up to 4 kW | PN, PS |
| ZF044 | Interpump motor flange, IEC 100/112 B14 | E1, SS1, 44, 58VHT, E2 and C2W |
| ZF091 | Interpump motor flange, IEC 100/112 B14 | 49, 50 and 51 |
| ZF151 | Interpump motor flange, IEC 100/112 B14 | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
| 1.099-541.0 | Hawk flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | NMT, NPM, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NPM Nickel-Plated, XLTI, XLTI High Temperature, NLTI, XLTI Atex, NMT - Car Wash Heavy Duty, NMT Chemical, NMT Stainless Steel Chemical, CHD 200, CHS 120 |
| 1.099-543.0 | Hawk flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical |
| ZG044 | Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | E1, SS1, 44, 58VHT, E2 and C2W |
| ZG091 | Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | 49 and 50 |
| ZG151 | Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
| ZGWW94 | Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | 51 |
Starter
The Iskra parts here are for three-phase starters at 400 V. A single-phase motor needs a single-phase starter, with protection set to 18.5 A.
Other motors in this range
RNM 63c4RNM 71a4RNM 71b4RNM 71c4RNM 80a4RNM 80b4RNM 80c4RNM 90La4RNM 90Lb4RNM 90Lc4RNM 90Sa4RNM 100a4RNM 100b4RNM 100c4RNM 112a4RNM 112b4RNM 112d4