PumpLookupPump and motor part numbers
Mains Units

NHDP 200-NEMA plunger pump

NHDP2030NER

Part number 1.904-605.0

  • 8Flow, l/min
  • 200Pressure, bar
  • 1740Speed, rpm
  • 2.8Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Hawk NHDP 200-NEMA pump

Specification

Flow
8 l/min
Pressure
200 bar
Speed
1740 rpm
Absorbed power
2.8 kW
Max water temperature
65 °C
Shaft side
Right
Shaft
Solid
Inlet
G 1/2
Outlet
G 3/8
Weight
8.4 kg
Oil
0.4 litres, SAE 10W40

Kits

Extraordinary maintenance7

Part numberDescriptionPer pumpSuppliers
1.099-738.0Plunger, 16 mm3 
1.099-740.0Plunger oil seal kit1 
1.904-249.0Valve plug assembly6 
1.904-737.0Complete seals packing Ø16 mm1 
1.904-738.0Complete manifold1 
1.905-622.0KIT crankcase seals1 
1.905-742.0Connecting rod and plunger rod assembly3 

Ordinary maintenance2

Part numberDescriptionPer pumpSuppliers
1.905-617.0Complete valve kit1 
1.905-736.0Plunger seal kit, 16 mm1 

Optional parts1

Part numberDescriptionPer pumpSuppliers
9.853-424.0Threaded brass plug G1/41 

Tools2

Part numberDescriptionPer pumpSuppliers
1.099-668.0Tool-kit1 
1.905-591.0Tool-kit extraordinary1 

Exploded view

Hawk exploded view of the NHDP 200-NEMA pump, with position numbers
Hawk's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 9.850-369.0 Crankcase1
2 9.853-555.0 Nhd plus cylinderhead spacer1
3 Kit only Plunger oil seal3 1.099-740.0
4 Kit only O-ring Ø1.78 x 26.73 1.904-737.0, 1.904-738.0, 1.905-736.0
5 Kit only Pressure ring Ø16 (nhd)3 1.904-737.0, 1.904-738.0
6 Kit only Sealing pist. ring Ø16 x 24 x 8 "U" HT3 1.904-737.0, 1.904-738.0, 1.905-736.0
7 Kit only Sealing pist. ring Ø16 x 26 x 9,5 "U" HT3 1.904-737.0, 1.904-738.0, 1.905-736.0
8 Kit only Copper washer G1/21 1.904-738.0
9 Kit only Brass plug G1/21 1.904-738.0
10 Kit only Cylinderhead1 1.904-738.0
11 Kit only O-ring Ø1.78 x 15.66 1.904-738.0, 1.905-617.0
12 Kit only Valve assembly6 1.904-738.0, 1.905-617.0
13 Kit only O-ring Ø1,78 x 18.776 1.904-249.0, 1.904-738.0, 1.905-617.0
14 Kit only Valve plug6 1.904-249.0, 1.904-738.0
15 Kit only Manifold stud bolt M14 x 602 1.904-737.0, 1.904-738.0, 1.905-736.0
16 Kit only Lock-washer2 1.904-738.0
17 Kit only Copper washer G1/4" (Ø13,3/19 x 1,5)1 1.904-738.0
18 Kit only Brass screw cap G 1/41 1.904-738.0
19 Kit only Copper washer G3/81 1.904-738.0
20 Kit only Brass plug G 3/82 1.904-738.0, 1.905-622.0
21 Kit only Valve seat6 1.904-738.0, 1.905-617.0
22 Kit only Valve plate6 1.904-738.0, 1.905-617.0
23 Kit only Valve spring6 1.904-738.0, 1.905-617.0
24 Kit only Valve cage6 1.904-738.0, 1.905-617.0
25 9.851-474.0 Screw M6 x 168
26 9.850-379.0 Bearing cover1
27 Kit only Bearing seal1 1.905-622.0
28 9.850-554.0 Crankshaft seal spacer1
29 9.851-198.0 Snap ring Ø25 mm1
30 9.850-460.0 Ball bearing1
31 9.850-253.0 Hollow shaft1
32 9.851-286.0 Oil dip stick1
33 9.850-354.0 Needel roller bearing1
34 Kit only Crankshaft seal1 1.905-622.0
35 9.850-637.0 Motor flange1
36 Kit only Spring washer Ø6 mm10 1.905-622.0
37 Kit only Screw M6 x 20 ISO4762 8.84 1.099-738.0
38 Kit only Plunger bolt3 1.099-738.0
39 Kit only Bonded seal - Ø6,7 x 11 x 1 AISI 3043 1.099-738.0
40 Kit only Ceramic piston Ø16 x 46.53 1.099-738.0
41 Kit only Copper spacer3 1.099-738.0
42 Kit only Plunger rod3 1.099-740.0
43 Kit only Connecting rod pin3 1.099-740.0
44 Kit only Connecting rod3 1.099-740.0
45 Kit only Connecting rod screw6 1.099-740.0
46 Kit only O-ring Ø2.62 x 111.621 1.905-622.0
47 9.850-392.0 Crankcase cover1
48 Kit only O-ring Ø1.78 x 141 1.905-622.0
49 Kit only Sight glass G3/41 1.905-622.0

Motor

Rated at 1740 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 2.8 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100b4 31440IEC 100IE36.8  
RN 100b4 31420IEC 100IE16.4  
RNM 100c4 31410IEC 100Single-phase17 at 230 V  
RNM 112c4 31415IEC 112Single-phase18.5 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RNE 100b4, RN 100b4, RNM 100c4) No Hawk flange listed for this motor.
  • IEC 112, 28 mm shaft (RNM 112c4) No Hawk flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Hawk coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Hawk coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Hawk NHDP 200-NEMA pumps

NHDP2030FNELNHDP2030FNERNHDP2030NELNHDP2830FNELNHDP2830FNERNHDP2830NELNHDP2830NERNHDP3530FNELNHDP3530FNER