NHDP 200-NEMA plunger pump
NHDP2830FNEL
Part number 1.904-610.0
- 10.5Flow, l/min
- 200Pressure, bar
- 3400Speed, rpm
- 3.9Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 10.5 l/min
- Pressure
- 200 bar
- Speed
- 3400 rpm
- Absorbed power
- 3.9 kW
- Max water temperature
- 65 °C
- Shaft side
- Left
- Shaft
- Solid
- Inlet
- G 1/2
- Outlet
- G 3/8
- Weight
- 8.9 kg
- Oil
- 0.4 litres
Kits
No kits are listed for this model. A supplier can look them up from the model NHDP2830FNEL.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model NHDP2830FNEL and part number 1.904-610.0.
Motor
Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 3.9 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 112a2 | 4 | 2910 | IEC 112 | IE3 | 7 | |
| RN 112a2 | 4 | 2895 | IEC 112 | IE1 | 7.8 | |
| RN 100b2 uprated | 4 | 2850 | IEC 100 | IE1 | 8 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 100, 28 mm shaft (RN 100b2) No Hawk flange listed for this motor.
- IEC 112, 28 mm shaft (RNE 112a2, RN 112a2) No Hawk flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 100, 28 mm motor shaft No Hawk coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
- IEC 112, 28 mm motor shaft No Hawk coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
Other Hawk NHDP 200-NEMA pumps
NHDP2030FNELNHDP2030FNERNHDP2030NELNHDP2030NERNHDP2830FNERNHDP2830NELNHDP2830NERNHDP3530FNELNHDP3530FNER