PumpLookupPump and motor part numbers
Mains Units

XWL-SS plunger pump

XWL-SS 26.06 N

Part number 22478

  • 26Flow, l/min
  • 60Pressure, bar
  • 1450Speed, rpm
  • 3Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi XWL-SS pump

Specification

Flow
26 l/min
Pressure
60 bar
Speed
1450 rpm
Absorbed power
3 kW
Weight
18 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2162Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2163Plunger kit, Ø28 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2164Water seal kit, Ø28 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2165Plunger guide kit, Ø28 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2873Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the XWL-SS pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 1941360 Screw TCEI M10x808
2 2520030 Plug6
3 1940150 Ring6
4 1140451 O-ring Ø 20,24x2,6212 KIT 2162
5 2529050 Complete valve6 KIT 2162
8 2520150 Head1
9 550351 O-ring Ø 23,81x2,621
10 2520040 Plug 3/4” G1
11 2340350 Plug 3/8" G2
12 740291 O-ring Ø 14x1,781
13 1941570 Ring Ø 283 KIT 2164
14 820631 Gasket Ø 283 KIT 2164
15 2520220 Ring3 KIT 2164
16 2520210 Piston guide Ø 283 KIT 2165
17 2520361 Gasket Ø 283 KIT 2164
18 2520230 Ring3 KIT 2164
19 2520200 Piston guide Ø 283 KIT 2165
20 820491 O-ring Ø 34,65x1,783 KIT 2164
21 1940560 Ring3 KIT 2873
22 2520330 Pump body1
23 650250 Key1
24 1940530 Shaft1
25 1940051 Connecting-rod3
26 1940960 Piston3
27 2520270 Plate3
28 2520240 Piston Ø 283 KIT 2163
29 800561 O-ring Ø 8,73x1,783
30 2520400 Screw3
31 1940060 Pin3
32 1140410 Bearing2
33 1941380 O-ring Ø 66,34x2,622 KIT 2873
34 1941390 Shim 0.05 mm
34 1941400 Shim 0.10 mm
34 1941410 Shim 0.19 mm
34 1941420 Shim 0.25 mm
35 1941290 Ring1
36 1941260 Plate1
37 1941270 Level gauge1
38 100410 O-ring Ø 34,6x2,621
39 2529011 Cover1
40 2340240 Screw TCEI M8x168
41 1140370 Plug1
42 1940410 O-ring Ø 132x31 KIT 2873
43 1260430 Ring1
44 1780690 Plate1
45 1260250 Level gauge1
46 1140450 O-ring Ø 20,24x2,621
47 740290 O-ring Ø 14x1,782
48 2340350 Plug 3/8" G1
49 2529010 Cover1
50 680560 Screw TCEI M6x166
51 2520320 Support1
52 820680 Ring1 KIT 2873
53 2529200 Head assembly1

Motor

A 4-pole motor of at least 3 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100b4 31440IEC 100IE36.8  
RN 100b4 31420IEC 100IE16.4  
RNM 100c4 31410IEC 100Single-phase17 at 230 V  
RNM 112c4 31415IEC 112Single-phase18.5 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RNE 100b4, RN 100b4, RNM 100c4) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNM 112c4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi XWL-SS pumps

XWL-SS 30.09 NXWL-SS 33.06 NXWL-SS 33.08 NXWL-SS 42.05 NXWL-SS 42.15 NXWL-SS 50.15 N