single-phase motor, 230 V
RNM 112a4
- 2.2Power, kW
- 1450Speed, rpm
- 4Poles
- 112IEC frame
- 12.5Amps at 230 V
Specification
- Rated output
- 2.2 kW
- Speed
- 1450 rpm (4-pole)
- Supply
- 230 V 50 Hz, single-phase. Also made for 240, 220, 120 and 110 V at 50 or 60 Hz to order.
- Current at 230 V
- 12.5 A
- Run capacitor
- 65 µF
- Efficiency
- 77%
- Power factor
- 0.99
- Starting current
- 3 × rated
- Torque
- 14.7 Nm
- Frame
- IEC 112
- Shaft end
- 28 × 60 mm
- Large flange (B5)
- FF215
- Small flange (B14)
- FT130
- Weight (B3)
- 27 kg
Pumps it drives
Pumps rated at this motor's speed that need no more than 2.2 kW, where this is the smallest motor that does the job.
Hawk NHDP 120 4
NHDP1012LNHDP1012RNHDP8512LNHDP8512R
Hawk NHDP 120-C 6
NHDP1012CLNHDP1012CRNHDP8512C1LNHDP8512C1RNHDP8512CLNHDP8512CR
Udor PN 2
Interpump 44 series 7
Interpump 51 series 4
Interpump 53 SS1 series 1
Interpump 53 SW1 series 1
Cat Pumps 3 Frame 2
Annovi Reverberi JR 2
Annovi Reverberi JRA 2
Annovi Reverberi RC 5
RC 8.15 C + F6RC 8.15 NRC 10.12 NRC 11.11 C + F6RC 12.10 C + F44
Annovi Reverberi RCA 1
Annovi Reverberi RCW 1
Annovi Reverberi RK-SS 2
RK-SS 11.11 C code 20961RK-SS 11.11 N code 20958
Annovi Reverberi RKA-SS 6
RKA-SS 3 G 15 E code 20969RKA-SS 3 G 15 E code 20973RKA-SS 3 G 15 N code 20965RKA-SS 3.6 G12 E code 20974RKA-SS 3.6 G 12 E code 20970RKA-SS 3.6 G 12 N code 20966
Annovi Reverberi RS 1
Annovi Reverberi XHW 1
Annovi Reverberi XMA-SS 1
Annovi Reverberi XT 2
Annovi Reverberi XTA 3
XTA 2G22 NXTA 3.5G13 NXTA 4G10 N
Comet FW2 1
Comet LW 3
Comet LWS 2
Bertolini WBL 5
WBL 813WBL 816WBL 913WBL 1010WBL 1111
Bertolini WBS 1
Speck NP10 4
NP10/7-150NP10/7-150 nickel-platedNP10/7-150RENP10/7-150S
Speck P11 1
Flanges and couplings
For an IEC 112 frame with a 28 mm shaft, bolting to the small flange (B14). Pick the one made for your pump series.
| Part number | Description | For pump series |
|---|---|---|
| 1.099-529.0 | Hawk motor flange, IEC 100/112 B14 | NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical |
| 1.099-530.0 | Hawk motor flange, IEC 100/112 B14 | NMT, NPM, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NPM Nickel-Plated, NLTI, NMT - Car Wash Heavy Duty, NMT Chemical, NMT Stainless Steel Chemical, CHD 200, CHS 120 |
| A08 | Udor motor flange A08, IEC 100/112 B3/B14, up to 4 kW | A, AK, AWT |
| BC04 | Udor motor flange BC04, IEC 100/112 B3/B14, up to 4 kW | B, BS, BCW, BWT, BK, C, CS, CWT, CK, CX, CH |
| P05 | Udor motor flange P05, IEC 100/112 B3/B14, up to 4 kW | PN, PS |
| ZF044 | Interpump motor flange, IEC 100/112 B14 | E1, SS1, 44, 58VHT, E2 and C2W |
| ZF091 | Interpump motor flange, IEC 100/112 B14 | 49, 50 and 51 |
| ZF151 | Interpump motor flange, IEC 100/112 B14 | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
| 1.099-541.0 | Hawk flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | NMT, NPM, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NPM Nickel-Plated, XLTI, XLTI High Temperature, NLTI, XLTI Atex, NMT - Car Wash Heavy Duty, NMT Chemical, NMT Stainless Steel Chemical, CHD 200, CHS 120 |
| 1.099-543.0 | Hawk flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical |
| ZG044 | Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | E1, SS1, 44, 58VHT, E2 and C2W |
| ZG091 | Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | 49 and 50 |
| ZG151 | Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
| ZGWW94 | Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump | 51 |
Starter
The Iskra parts here are for three-phase starters at 400 V. A single-phase motor needs a single-phase starter, with protection set to 12.5 A.
Other motors in this range
RNM 63c4RNM 71a4RNM 71b4RNM 71c4RNM 80a4RNM 80b4RNM 80c4RNM 90La4RNM 90Lb4RNM 90Lc4RNM 90Sa4RNM 100a4RNM 100b4RNM 100c4RNM 112b4RNM 112c4RNM 112d4