XTA plunger pump
XTA 2G22 N
Part number 7416
- 8Flow, l/min
- 150Pressure, bar
- 1750Speed, rpm
- 2.2Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 8 l/min
- Pressure
- 150 bar
- Speed
- 1750 rpm
- Absorbed power
- 2.2 kW
- Weight
- 5 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 1864 | Valve kit |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 1866 | Water seal kit, Ø15 mm |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 1872 | Oil seal kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2628 | Plunger kit, Ø15 mm |
Exploded view
Parts list
Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 680570 | Screw TCEI M6x60 | 6 | |
| 1 | 1322730 | Screw TCEI M6x60 | 6 | |
| 1 | 1260140 | Ring Ø 15 | 3 | |
| 1 | 1260141 | Ring Ø 15 | 3 | |
| 1 | 1520120 | Ring Ø 15 | 3 | |
| 2 | 1381550 | Washer | 6 | |
| 3 | 1260162 | Plug | 6 | |
| 3 | 1260161 | Plug - C=34Nm 1/8”G | ||
| 3 | 1271650 | Water seal Ø 15 | 3 | |
| 4 | 960160 | O-ring Ø 17,86x2,62 | 6 | |
| 5 | 1269050 | Complete valve | 6 | KIT 1864 |
| 6 | 880830 | O-ring Ø 15,54x2,62 | 6 | KIT 1864 |
| 7 | 620301 | Plug 1/8" G | 1 | |
| 7 | 1260021 | Head | 1 | |
| 7 | 1320022 | Head | 1 | |
| 9 | 180101 | O-ring Ø 17,5x2 | 1 | |
| 10 | 820361 | Plug 1/2" G brass | 1 | |
| 11 | 1980740 | Plug 3/8" G brass | 1 | |
| 12 | 740290 | O-ring Ø 14x1,78 | 2 | |
| 15 | 1260151 | Piston guide Ø 15 | 3 | |
| 16 | 1260420 | O-ring Ø 26,70x1,78 | 3 | KIT 1866 |
| 17 | 1260440 | Water seal Ø 15 | 3 | KIT 1866 |
| 18 | 1260460 | Oil seal | 3 | KIT 1872 |
| 19 | 1320010 | Pump body | 1 | |
| 20 | 1320330 | Bushing | 1 | |
| 21 | 1320370 | Bearing | 1 | |
| 22 | 1260790 | Ring | 1 | |
| 23 | 1266740 | Oil seal | 1 | KIT 1872 |
| 24 | 880130 | Plug | 1 | |
| 25 | 1260110 | Nut | 3 | KIT 2628 |
| 26 | 1260100 | Washer | 3 | KIT 2628 |
| 27 | 1260120 | Piston Ø 15 | 3 | KIT 2628 |
| 28 | 480480 | O-ring Ø 4,48x1,78 | 3 | KIT 2628 |
| 29 | 1260091 | Plate | 3 | KIT 2628 |
| 30 | 1260070 | Piston | 3 | |
| 31 | 1260080 | Pin | 3 | |
| 32 | 1260060 | Connecting-rod | 3 | |
| 32 | 1320140 | Connecting-rod | 3 | |
| 33 | 1260040 | Oil seal | 1 | KIT 1872 |
| 34 | 1260430 | Ring | 1 | |
| 35 | 1780690 | Plate | 1 | |
| 36 | 1260250 | Level gauge | 1 | |
| 37 | 1140450 | O-ring Ø 20,24x2,62 | 1 | |
| 38 | 1269101 | Cover | 1 | |
| 38 | 1329010 | Cover | 1 | |
| 39 | 1260760 | Screw TCEI M5x20 | 6 | |
| 40 | 1980740 | Plug 3/8" G brass | 1 | |
| 41 | 1263890 | Foot | 2 | |
| 42 | 1260470 | Screw TE M8x10 | 4 | |
| 43 | 1260190 | Shaft | 1 | |
| 44 | 1380520 | Key | 1 | |
| 45 | 1320370 | Bearing | 1 | |
| 46 | 1260790 | Ring | 1 | |
| 47 | 1260750 | Ring | 1 | KIT 1872 |
| 47 | 1269218 | Head assembly | 1 | KIT 1872 |
| 47 | 1269221 | Head assembly | 1 | KIT 1872 |
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 2.2 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 100a4 | 2.2 | 1455 | IEC 100 | IE3 | 5.9 | |
| RN 100a4 | 2.2 | 1420 | IEC 100 | IE1 | 4.9 | |
| RN 90Lc4 uprated | 2.2 | 1400 | IEC 90L | IE1 | 5.4 | |
| RNM 90Lc4 | 2.2 | 1370 | IEC 90L | Single-phase | 14.5 at 230 V | |
| RNM 100a4 | 2.2 | 1430 | IEC 100 | Single-phase | 14 at 230 V | |
| RNM 112a4 | 2.2 | 1450 | IEC 112 | Single-phase | 12.5 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 90, 24 mm shaft (RN 90Lc4, RNM 90Lc4) No Annovi Reverberi flange listed for this motor.
- IEC 100, 28 mm shaft (RNE 100a4, RN 100a4, RNM 100a4) No Annovi Reverberi flange listed for this motor.
- IEC 112, 28 mm shaft (RNM 112a4) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
- IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
- IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.