three-phase motor, IE1

RN 90Lc4

uprated

2.2Power, kW
1400Speed, rpm
4Poles
90LIEC frame
5.4Amps at 400 V

Specification

Rated output: 2.2 kW
Speed: 1400 rpm (4-pole)
Supply: 230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
Current at 400 V: 5.4 A
Efficiency: 75.5%, IE1
Power factor: 0.78
Starting current: 5 × rated
Torque: 14 Nm
Frame: IEC 90L
Shaft end: 24 × 50 mm
Large flange (B5): FF165
Small flange (B14): FT115
Weight (B3): 16.3 kg

Uprated: Nicolini mark this power as one IEC does not list for the frame. It gives more power in a smaller frame, at lower efficiency.

Pumps it drives

Pumps rated at this motor's speed that need no more than 2.2 kW, where this is the smallest motor that does the job.

Flanges and couplings

For an IEC 90 frame with a 24 mm shaft, bolting to the small flange (B14). Pick the one made for your pump series.

Part number	Description	For pump series
1.099-528.0	Hawk motor flange, IEC 90 B14	NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical
1.099-534.0	Hawk motor flange, IEC 90 B14	CHS 120
ZF070	Interpump motor flange, IEC 90 B14	E1, SS1, 44, 58VHT, E2, C2W, 50 and 51
1.099-542.0	Hawk flexible coupling, IEC 90, 24 mm motor to 24 mm pump	NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical, CHD 200, CHS 120
1.099-544.0	Hawk flexible coupling, IEC 90, 24 mm motor to 24 mm pump	NMT, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NMT - Car Wash Heavy Duty, NMT Chemical, NMT Stainless Steel Chemical
ZG070	Interpump flexible coupling, IEC 90, 24 mm motor to 24 mm pump	E1, SS1, 44, 58VHT, E2, C2W and 50
ZGWW75	Interpump flexible coupling, IEC 90, 24 mm motor to 24 mm pump	51

Starter

Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.

Contactor

KNL9 contactors, rated 4 kW AC-3 at 400 V

Coil	Type	Iskra code
24 V AC B7	KNL9-01 1NC	030050615000
24 V AC B7	KNL9-10 1NO	030050616000
42 V AC D7	KNL9-01 1NC	030050633000
42 V AC D7	KNL9-10 1NO	030050634000
48 V AC E7	KNL9-01 1NC	030050635000
48 V AC E7	KNL9-10 1NO	030050636000
110-125 V AC F7	KNL9-01 1NC	030050637000
110-125 V AC F7	KNL9-10 1NO	030050638000
208 V AC	KNL9-01 1NC	030050819000
220-240 V AC M7	KNL9-01 1NC	030050475000
220-240 V AC M7	KNL9-10 1NO	030050474000
380-415 V AC Q7	KNL9-01 1NC	030050639000
380-415 V AC Q7	KNL9-10 1NO	030050640000
440-460 V AC R7	KNL9-10 1NO	030050919000
480-520 V AC S7	KNL9-01 1NC	030050641000
480-520 V AC S7	KNL9-10 1NO	030050642000

Overload protection

Set to the motor's full-load current, 5.4 A.

RN 90Lc4

Specification

Pumps it drives

Hawk NHDP 120 4

Hawk NHDP 120-C 6

Udor PN 2

Interpump 44 series 7

Interpump 51 series 4

Interpump 53 SS1 series 1

Interpump 53 SW1 series 1

Cat Pumps 3 Frame 2

Annovi Reverberi JR 2

Annovi Reverberi JRA 2

Annovi Reverberi RC 5

Annovi Reverberi RCA 1

Annovi Reverberi RCW 1

Annovi Reverberi RK-SS 2

Annovi Reverberi RKA-SS 6

Annovi Reverberi RS 1

Annovi Reverberi XHW 1

Annovi Reverberi XMA-SS 1

Annovi Reverberi XT 2

Annovi Reverberi XTA 3

Comet FW2 1

Comet LW 3

Comet LWS 2

Bertolini WBL 5

Bertolini WBS 1

Speck NP10 4

Speck P11 1

Flanges and couplings

Starter

Contactor

Overload protection

Other motors in this range