PumpLookupPump and motor part numbers
Mains Units

XHW plunger pump

XHW 08.15 N

Part number 23972

  • 8Flow, l/min
  • 150Pressure, bar
  • 1450Speed, rpm
  • 2.2Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi XHW pump

Specification

Flow
8 l/min
Pressure
150 bar
Speed
1450 rpm
Absorbed power
2.2 kW
Weight
6.5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2739Plunger kit, Ø15 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2740Support ring kit, Ø15 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2786Oil seal kit 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 42331Valve kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42332Water seal kit, Ø15 mm 

Exploded view

Annovi Reverberi exploded view of the XHW pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960160 O-ring Ø 17,86x2,626
2 1781550 Plug6
3 1269050 Complete valve6 KIT 42331
4 880833 O-ring Ø 15,54x2,626 KIT 42331
5 1781700 Plug 1/8" G1
6 1780130 Ring Ø 153 KIT 2740
7 1781510 Gasket Ø 153 KIT 42332
8 1781520 Piston guide Ø 153
9 2580010 Pump body1
10 1266740 Oil seal1 KIT 2786
11 1260790 Ring1
12 1780550 Ring1
13 1780490 Bearing1
14 880130 Plug1
15 1780050 Pin3
16 1780510 O-ring Ø 106x31 KIT 2786
17 680560 Screw TCEI M6x166
18 2349012 Cover1
19 1780710 Connecting-rod3
20 1780060 Piston3
21 480480 O-ring Ø 4,48x1,783
22 1260091 Plate3
23 1780070 Piston Ø 153 KIT 2739
24 1260100 Washer3
25 1260110 Nut3
27 740290 O-ring Ø 14x1,783
28 1981180 Plug 3/8" G nickel-plated2
30 1260460 Oil seal3 KIT 2786
31 1781530 Piston guide Ø153 KIT 42332
32 770260 O-ring Ø 23,52x1,783 KIT 42332
33 1781500 Gasket Ø 153 KIT 42332
34 960870 Plug 1/2" G nickel-plated1
35 180101 O-ring Ø 17,5x21
36 1781540 Head1
37 1381550 Washer8
38 2580090 Screw TCEI M6x608
40 1321190 Bearing1
41 1321080 Ring1
45 1780190 Shaft1
46 1380520 Key1
47 1260750 Oil seal1 KIT 2786
57 1789302 Head assembly1
71 1260250 Level gauge1
72 1260430 Ring1
73 1780690 Plate1
74 1140450 O-ring Ø 20,24x2,621
75 1980740 Plug 3/8" G brass1

Motor

A 4-pole motor of at least 2.2 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100a4 2.21455IEC 100IE35.9  
RN 100a4 2.21420IEC 100IE14.9  
RN 90Lc4 uprated 2.21400IEC 90LIE15.4  
RNM 90Lc4 2.21370IEC 90LSingle-phase14.5 at 230 V  
RNM 100a4 2.21430IEC 100Single-phase14 at 230 V  
RNM 112a4 2.21450IEC 112Single-phase12.5 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RN 90Lc4, RNM 90Lc4) No Annovi Reverberi flange listed for this motor.
  • IEC 100, 28 mm shaft (RNE 100a4, RN 100a4, RNM 100a4) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNM 112a4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi XHW pumps

XHW 11.17 N