53 SS1 series plunger pump
SS1B1507
- 7Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 2.01Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 7 l/min
- Pressure
- 150 bar
- Speed
- 1450 rpm
- Absorbed power
- 2.01 kW
- Weight
- 6 kg
Kits
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 311 | Oil seal kit | 3 |
Valves2
Other kits6
Parts list
Positions are the balloon numbers on Interpump's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 2 | 36202551 | Valve cage | 3 | KIT 341 |
| 3 | 94737300 | Spring Ø9.4 x 14.8 - S.S. | 3 | KIT 341 |
| 4 | 36200176 | Valve plate | 3 | KIT 341 |
| 5 | 36203666 | Valve seat stainless (63SS) | 3 | KIT 341 |
| 6 | 90384100 | O-ring 17,12 x 2,62 (3068) | 3 | KIT 341 |
| 7 | 36713001 | Valve assembly (63 SS) | 3 | KIT 341 |
| 8 | 90384700 | O-ring 20,29 x 2,62(3081) | 3 | KIT 335 |
| 9 | 98221420 | Plug M24 x 1.5 x 13.2 | 3 | KIT 335 |
| 10 | 99169000 | Screw M05 x 55 spec. A2-70 | 3 | |
| 11 | 96690500 | Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT | 3 | |
| 13 | 90359300 | O-ring 15,60 x 1,78 (2062) | 3 | KIT 336 |
| 14 | 98213720 | Plug M18 x 1,5 x 10 Ø23 F12 SS | 3 | KIT 336 |
| 15 | 90367400 | O-ring Ø12 x 2 (120-20) | 3 | KIT 334 |
| 16 | 53211166 | Valve seat - S.S. | 3 | KIT 334 |
| 17 | 36211276 | Spherical valve | 3 | KIT 334 |
| 18 | 94733300 | Spring Ø6.2 x 10.5 S.S. | 3 | KIT 334 |
| 19 | 36211151 | Valve cage | 3 | KIT 334 |
| 20 | 36724501 | Outlet valve S.53 SS | 3 | KIT 334 |
| 21 | 99199200 | Screw M6 x 60 UNI 5931 | 8 | |
| 25 | 90360400 | O-ring 25,12 x 1,78 (2100) | 3 | KIT 337, KIT 338, KIT 339, KIT 340 |
| 27 | 98210066 | Plug G 3/8 x 13 stainless | 1 | |
| 28 | 98218000 | Plug G 1/2 x 10 stainless | 1 | |
| 29 | 96699000 | Washer Ø7.5 x 23 x 0.5 | 3 | |
| 30 | 53210382 | Sponge gasket d. 3.0 x 85.0 | 1 | |
| 31 | 58210451 | Protection | 1 | |
| 32 | 53010122 | Pump crankcase | 1 | |
| 33 | 90159300 | Oil seal d. 18.0 x 24.0 x 4.0 | 3 | KIT 311 |
| 34 | 53050166 | Piston guide | 3 | |
| 35 | 97733800 | Connecting-rod pin d. 10 x 26.5 | 3 | |
| 36 | 53030022 | Connecting rod | 3 | |
| 37 | 99183800 | Screw M6 x 14 UNI 5931 | 8 | |
| 38 | 90063500 | Circlip Ø25 UNI 7435 | 2 | |
| 39 | 90385900 | O-ring 25,07 x 2,62 (3100) | 1 | |
| 40 | 53210851 | Oil level gauge | 1 | |
| 41 | 60028335 | Crankshaft C.10.0, SS1B1507 SS1B1511 SS1C1509 SS1C1513 | 1 | |
| 42 | 90067100 | Circlip ZJ30 | 1 | |
| 43 | 91832800 | Ball bearing | 2 | |
| 44 | 53150122 | Side crankcase cover | 1 | |
| 45 | 90389800 | O-ring 56,82 x 2,62 (3225) | 1 | |
| 46 | 90164100 | Oil seal Ø25 x 62 x 10 | 1 | |
| 47 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 | |
| 48 | 98210800 | Oil dipstick G 3/8’’x45 | 1 | |
| 49 | 90391700 | O-ring d. 88.57 x 2.62 NBR 70SH 3350 | 1 | |
| 50 | 53160122 | Rear crankcase cover | 1 | |
| 51 | 98204000 | Plug G1/4 x 9 S.S. | 1 | |
| 52 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 | |
| 53 | 99303700 | Screw m 8 x 16-5739 | 4 | |
| 54 | 96701600 | Washer 8,4 | 4 | |
| 55 | 50200074 | Pump foot | 2 |
Motor
A 4-pole motor of at least 2.01 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 100a4 | 2.2 | 1455 | IEC 100 | IE3 | 5.9 | |
| RN 100a4 | 2.2 | 1420 | IEC 100 | IE1 | 4.9 | |
| RN 90Lc4 uprated | 2.2 | 1400 | IEC 90L | IE1 | 5.4 | |
| RNM 90Lc4 | 2.2 | 1370 | IEC 90L | Single-phase | 14.5 at 230 V | |
| RNM 100a4 | 2.2 | 1430 | IEC 100 | Single-phase | 14 at 230 V | |
| RNM 112a4 | 2.2 | 1450 | IEC 112 | Single-phase | 12.5 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 90, 24 mm shaft (RN 90Lc4, RNM 90Lc4) ZF070 Motor flange, IEC 90 B14
- IEC 100, 28 mm shaft (RNE 100a4, RN 100a4, RNM 100a4) ZF044 Motor flange, IEC 100/112 B14
- IEC 112, 28 mm shaft (RNM 112a4) ZF044 Motor flange, IEC 100/112 B14
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 90, 24 mm motor shaft ZG070 Flexible coupling, IEC 90, 24 mm motor to 24 mm pump
- IEC 100, 28 mm motor shaft ZG044 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
- IEC 112, 28 mm motor shaft ZG044 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
Other Interpump 53 SS1 series pumps
SS1B1503SS1B1505SS1B1506SS1B1509SS1B1511SS1B1513SS1B1514SS1C1509SS1C1511SS1C1513SS1C1515