JR plunger pump
JR 8.15 N
Part number 26438
- 8Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 2.2Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 8 l/min
- Pressure
- 150 bar
- Speed
- 1450 rpm
- Absorbed power
- 2.2 kW
- Weight
- 4 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 43478 | Valve kit |
Other kits1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 43482 | O-ring kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 43894 | Plunger kit |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 43895 | Oil seal kit |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 43896 | Water seal kit |
Exploded view
Parts list
Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 3800250 | Screw TSEI M4x8 | 1 | |
| 2 | 3800180 | Knob | 1 | |
| 3 | 3800190 | Screw | 1 | |
| 4 | 1980220 | Plate | 1 | |
| 5 | 2760410 | Spring | 1 | |
| 6 | 4140170 | Piston | 1 | |
| 7 | 2260100 | O-ring Ø 6,02x2,62 | 1 | KIT 43482 |
| 8 | 660190 | O-ring Ø 6,07x1,78 | 1 | KIT 43482 |
| 9 | 2760210 | Ring | 1 | KIT 43482 |
| 10 | 3800210 | Piston guide | 1 | |
| 11 | 740290 | O-ring Ø 14x1,78 | 1 | KIT 43482 |
| 12 | 820510 | O-ring Ø 10,82x1,78 | 1 | KIT 43482 |
| 13 | 3800230 | Piston | 1 | |
| 14 | 2841080 | Seat | 1 | |
| 15 | 1470210 | O-ring Ø 9x1 | 2 | KIT 43482 |
| 16 | 3700240 | Hose tail Ø 8 | 1 | |
| 17 | 480480 | O-ring Ø 4,48x1,78 | 1 | KIT 43482 |
| 18 | 1250280 | Ball | 1 | |
| 19 | 1560520 | Spring | 1 | |
| 20 | 2760230 | Fitting 3/8”G | 1 | |
| 21 | 2760270 | O-ring Ø 12x1 | 1 | KIT 43482 |
| 22 | 394280 | O-ring Ø 12,42x1,78 | 1 | KIT 43482 |
| 23 | 2760120 | Injector Ø 2,0 | 1 | |
| 24 | 2760200 | Spring | 1 | |
| 25 | 2761511 | Shutter | 1 | |
| 26 | 2101770 | O-ring Ø 4x2,5 | 1 | KIT 43482 |
| 27 | 1345180 | Screw TCEI M5x40 | 8 | |
| 28 | 4140140 | Washer | 8 | |
| 29 | 4140530 | Head brass | 1 | |
| 30 | 3800200 | Nut M16x1 | 1 | |
| 31 | 3800240 | Screw M3x4 | 1 | |
| 32 | 3800310 | Screw | 1 | |
| 33 | 2760260 | Plug 1/4” G | 1 | |
| 34 | 2840130 | Plug | 6 | |
| 35 | 2849051 | Complete valve | 6 | KIT 43478 |
| 36 | 2841520 | O-ring Ø 13,5x1,8 | 6 | KIT 43482 |
| 37 | 3800140 | Gasket | 6 | KIT 43896 |
| 39 | 4140490 | Bushing Ø 14 | 3 | |
| 40 | 4140510 | O-ring Ø 22,5x1 | 3 | KIT 43896 |
| 41 | 3800170 | Bushing | 3 | |
| 42 | 3700250 | O-ring Ø 8x1,1 | 3 | KIT 43482 |
| 43 | 2841800 | Plug | 1 | |
| 44 | 3800111 | Ring | 3 | KIT 43895 |
| 45 | 4140520 | Pump body | 1 | |
| 46 | 4140150 | Cover | 1 | KIT 43895 |
| 47 | 4140360 | Ring | 2 | |
| 49 | 4140110 | Bearing | 1 | |
| 50 | 4140210 | Plug | 1 | |
| 51 | 4140430 | Piston Ø 14 | 3 | KIT 43894 |
| 52 | 4140070 | Pin | 3 | |
| 53 | 4140080 | Connecting-rod | 3 | |
| 54 | 4140090 | O-ring | 1 | KIT 43895 |
| 55 | 4140270 | Screw TE 5x8 | 4 | |
| 56 | 4140030 | Cover | 1 | |
| 57 | 4140050 | Shaft | 1 | |
| 58 | 4140100 | Bearing | 1 | |
| 59 | 4140190 | Ring | 1 | |
| 60 | 4140200 | Oil seal | 1 | KIT 43895 |
| 61 | 1380520 | Key | 1 | |
| 62 | 4149207 | Head assembly | 1 | |
| 63 | 1120681 | O-ring Ø 3,39x1,78 | 1 | |
| 64 | 600180 | O-ring Ø 7,66x1,78 | 1 | |
| 65 | 1344950 | Plug | 1 | |
| 66 | 2841800 | Plug | 1 | |
| 67 | 3800890 | Ring | 3 |
Motor
A 4-pole motor of at least 2.2 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 100a4 | 2.2 | 1455 | IEC 100 | IE3 | 5.9 | |
| RN 100a4 | 2.2 | 1420 | IEC 100 | IE1 | 4.9 | |
| RN 90Lc4 uprated | 2.2 | 1400 | IEC 90L | IE1 | 5.4 | |
| RNM 90Lc4 | 2.2 | 1370 | IEC 90L | Single-phase | 14.5 at 230 V | |
| RNM 100a4 | 2.2 | 1430 | IEC 100 | Single-phase | 14 at 230 V | |
| RNM 112a4 | 2.2 | 1450 | IEC 112 | Single-phase | 12.5 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 90, 24 mm shaft (RN 90Lc4, RNM 90Lc4) No Annovi Reverberi flange listed for this motor.
- IEC 100, 28 mm shaft (RNE 100a4, RN 100a4, RNM 100a4) No Annovi Reverberi flange listed for this motor.
- IEC 112, 28 mm shaft (RNM 112a4) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
- IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
- IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.