PumpLookupPump and motor part numbers
Mains Units

WBL plunger pump

WBL 1010

Part number 02.6006.97.3

  • 10Flow, l/min
  • 100Pressure, bar
  • 1450Speed, rpm
  • 1.9Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Bertolini WBL pump

Specification

Flow
10 l/min
Pressure
100 bar
Speed
1450 rpm
Absorbed power
1.9 kW
Max water temperature
60 °C
Plunger
18 mm
Shaft
Solid, Ø24 mm
Inlet
3/8 BSP
Outlet
3/8 BSP
Weight
5.8 kg
Oil
0.5 litres, SAE 75 - W 90

Data sheet (PDF, Bertolini)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
019826973Valve kit 141 

Water seals1

Part numberDescriptionPer pumpSuppliers
049813973Seal kit 12, Ø18 mm plungers 

Oil seals1

Part numberDescriptionPer pumpSuppliers
049836973Radial ring kit 64 

Parts list

For parts not covered by the kits above, ask a supplier and quote the model WBL 1010 and part number 02.6006.97.3.

Motor

A 4-pole motor of at least 1.9 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100a4 2.21455IEC 100IE35.9  
RN 100a4 2.21420IEC 100IE14.9  
RN 90Lc4 uprated 2.21400IEC 90LIE15.4  
RNM 90Lc4 2.21370IEC 90LSingle-phase14.5 at 230 V  
RNM 100a4 2.21430IEC 100Single-phase14 at 230 V  
RNM 112a4 2.21450IEC 112Single-phase12.5 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RN 90Lc4, RNM 90Lc4) No Bertolini flange listed for this motor.
  • IEC 100, 28 mm shaft (RNE 100a4, RN 100a4, RNM 100a4) No Bertolini flange listed for this motor.
  • IEC 112, 28 mm shaft (RNM 112a4) No Bertolini flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Bertolini coupling listed: you need one for a 24 mm motor shaft to 24 mm pump shaft.
  • IEC 100, 28 mm motor shaft No Bertolini coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.
  • IEC 112, 28 mm motor shaft No Bertolini coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.

Other Bertolini WBL pumps

WBL 809-FWBL 810WBL 812-FWBL 813WBL 814-FWBL 816WBL 911WBL 913WBL 917WBL 1010-FWBL 1012WBL 1012-FWBL 1016WBL 1016-FWBL 1109WBL 1110-FWBL 1111WBL 1114-FWBL 1115WBL 1309-FWBL 1312WBL 1312-FWBL 1410-F