PumpLookupPump and motor part numbers
Mains Units

WBL plunger pump

WBL 1016-F

Part number 02.6025.97.3

  • 10Flow, l/min
  • 160Pressure, bar
  • 2800Speed, rpm
  • 2.9Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Bertolini WBL pump

Specification

Flow
10 l/min
Pressure
160 bar
Speed
2800 rpm
Absorbed power
2.9 kW
Max water temperature
60 °C
Plunger
15 mm
Shaft
Solid, Ø24 mm
Inlet
3/8 BSP
Outlet
3/8 BSP
Weight
5.8 kg
Oil
0.5 litres, SAE 75 - W 90

Data sheet (PDF, Bertolini)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
019826973Valve kit 141 

Oil seals1

Part numberDescriptionPer pumpSuppliers
049836973Radial ring kit 64 

Water seals1

Part numberDescriptionPer pumpSuppliers
049843973Seal kit 73, Ø15 mm plungers 

Parts list

For parts not covered by the kits above, ask a supplier and quote the model WBL 1016-F and part number 02.6025.97.3.

Motor

A 2-pole motor of at least 2.9 kW drives this pump at 2800 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100a2 32900IEC 100IE35.6  
RN 100a2 32880IEC 100IE16.2  
RN 90Lb2 uprated 32890IEC 90LIE16.3  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RN 90Lb2) No Bertolini flange listed for this motor.
  • IEC 100, 28 mm shaft (RNE 100a2, RN 100a2) No Bertolini flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Bertolini coupling listed: you need one for a 24 mm motor shaft to 24 mm pump shaft.
  • IEC 100, 28 mm motor shaft No Bertolini coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.

Other Bertolini WBL pumps

WBL 809-FWBL 810WBL 812-FWBL 813WBL 814-FWBL 816WBL 911WBL 913WBL 917WBL 1010WBL 1010-FWBL 1012WBL 1012-FWBL 1016WBL 1109WBL 1110-FWBL 1111WBL 1114-FWBL 1115WBL 1309-FWBL 1312WBL 1312-FWBL 1410-F