three-phase motor, IE1

RN 100a2

3Power, kW
2880Speed, rpm
2Poles
100IEC frame
6.2Amps at 400 V

Specification

Rated output: 3 kW
Speed: 2880 rpm (2-pole)
Supply: 230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
Current at 400 V: 6.2 A
Efficiency: 83.2%, IE1
Power factor: 0.84
Starting current: 6.8 × rated
Torque: 9.9 Nm
Frame: IEC 100
Shaft end: 28 × 60 mm
Large flange (B5): FF215
Small flange (B14): FT130
Weight (B3): 21 kg

Pumps it drives

Pumps rated at this motor's speed that need no more than 3 kW, where this is the smallest motor that does the job.

Flanges and couplings

For an IEC 100 frame with a 28 mm shaft, bolting to the small flange (B14). Pick the one made for your pump series.

Part number	Description	For pump series
1.099-529.0	Hawk motor flange, IEC 100/112 B14	NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical
1.099-530.0	Hawk motor flange, IEC 100/112 B14	NMT, NPM, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NPM Nickel-Plated, NLTI, NMT - Car Wash Heavy Duty, NMT Chemical, NMT Stainless Steel Chemical, CHD 200, CHS 120
A08	Udor motor flange A08, IEC 100/112 B3/B14, up to 4 kW	A, AK, AWT
BC04	Udor motor flange BC04, IEC 100/112 B3/B14, up to 4 kW	B, BS, BCW, BWT, BK, C, CS, CWT, CK, CX, CH
P05	Udor motor flange P05, IEC 100/112 B3/B14, up to 4 kW	PN, PS
ZF044	Interpump motor flange, IEC 100/112 B14	E1, SS1, 44, 58VHT, E2 and C2W
ZF091	Interpump motor flange, IEC 100/112 B14	49, 50 and 51
ZF151	Interpump motor flange, IEC 100/112 B14	47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3
1.099-541.0	Hawk flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump	NMT, NPM, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NPM Nickel-Plated, XLTI, XLTI High Temperature, NLTI, XLTI Atex, NMT - Car Wash Heavy Duty, NMT Chemical, NMT Stainless Steel Chemical, CHD 200, CHS 120
1.099-543.0	Hawk flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump	NHDP Car Wash, NHDP 120, NHDP 150, NHDP 200, NHDP Chemical, NHDP Stainless Steel Chemical
ZG044	Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump	E1, SS1, 44, 58VHT, E2 and C2W
ZG091	Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump	49 and 50
ZG151	Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump	47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3
ZGWW94	Interpump flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump	51

Starter

Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.

Contactor

KNL9 contactors, rated 4 kW AC-3 at 400 V

Coil	Type	Iskra code
24 V AC B7	KNL9-01 1NC	030050615000
24 V AC B7	KNL9-10 1NO	030050616000
42 V AC D7	KNL9-01 1NC	030050633000
42 V AC D7	KNL9-10 1NO	030050634000
48 V AC E7	KNL9-01 1NC	030050635000
48 V AC E7	KNL9-10 1NO	030050636000
110-125 V AC F7	KNL9-01 1NC	030050637000
110-125 V AC F7	KNL9-10 1NO	030050638000
208 V AC	KNL9-01 1NC	030050819000
220-240 V AC M7	KNL9-01 1NC	030050475000
220-240 V AC M7	KNL9-10 1NO	030050474000
380-415 V AC Q7	KNL9-01 1NC	030050639000
380-415 V AC Q7	KNL9-10 1NO	030050640000
440-460 V AC R7	KNL9-10 1NO	030050919000
480-520 V AC S7	KNL9-01 1NC	030050641000
480-520 V AC S7	KNL9-10 1NO	030050642000

Overload protection

Set to the motor's full-load current, 6.2 A.

RN 100a2

Specification

Pumps it drives

Hawk NHDP 200-NEMA 2

Udor PN 2

Interpump 44 series 1

Interpump 51 series 6

Interpump 53 E1 series 3

Interpump 53 ET1 brass series 3

Annovi Reverberi JRS 4

Annovi Reverberi JRV 1

Annovi Reverberi RMV 2

Annovi Reverberi RMW 2

Annovi Reverberi RSS 2

Annovi Reverberi SJS 1

Annovi Reverberi SJV 1

Annovi Reverberi XJS 5

Annovi Reverberi XTS 3

Comet LWR-K 1

Bertolini WBL 4

Bertolini WBS 1

Bertolini WML 1

Flanges and couplings

Starter

Contactor

Overload protection

Other motors in this range