three-phase motor, IE1
RN 160Ma2
- 11Power, kW
- 2930Speed, rpm
- 2Poles
- 160MIEC frame
- 21.9Amps at 400 V
Specification
- Rated output
- 11 kW
- Speed
- 2930 rpm (2-pole)
- Supply
- 230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
- Current at 400 V
- 21.9 A
- Efficiency
- 88.5%, IE1
- Power factor
- 0.82
- Starting current
- 6.4 × rated
- Torque
- 36 Nm
- Frame
- IEC 160M
- Shaft end
- 42 × 110 mm
- Large flange (B5)
- FF300
- Small flange (B14)
- None for this frame
- Weight (B3)
- 80 kg
Pumps it drives
Pumps rated at this motor's speed that need no more than 11 kW, where this is the smallest motor that does the job.
Hawk NPM-GR 2
Interpump 53 E1 series 1
Interpump 58 E2 series 1
Interpump 59 E3 series 3
Mazzoni MMD-EDM-E4 4
MMD-EDM E4 16275LMMD-EDM E4 16275RMMD-EDM E4 18275LMMD-EDM E4 18275R
Annovi Reverberi RKV 3
RKV 4.5G40H D+F41 code 21134RKV 4G40H D+F41 code 21133RKV 5.5G40H D+F41 code 21135
Annovi Reverberi RRV 1
Annovi Reverberi RSV 1
Comet EWD 1
Comet EWD-K 2
Flanges and couplings
For an IEC 160 frame with a 42 mm shaft, bolting to the large flange (B5). Pick the one made for your pump series.
| Part number | Description | For pump series |
|---|---|---|
| 1.099-532.0 | Hawk motor flange, IEC 160 B5 | XLTI, XLTI High Temperature, PXI 350, XXT, XLTI Atex, PXI 500, XXT High Temperature, XLTI Chemical, XLTI Stainless Steel Chemical, PXI Heavy Duty |
| C14 | Udor motor flange C14, IEC 160 B3/B5, up to 15 kW | C, CS, CWT, CK, CX, CH |
| NK01 | Udor motor flange NK01, IEC 160 B3/B5, up to 15 kW | NK, NKS, NH |
| 1.905-878.0 | Hawk flexible coupling, IEC 160, 42 mm motor to 30 mm pump | MXT, MXT High Temperature, MPX 350, MPX 500, MXT Chemical, MPX Heavy Duty, MXT Stainless Steel Chemical, MXT High Flow |
| 1.905-890.0 | Hawk flexible coupling, IEC 160, 42 mm motor to 24 mm pump | XLTI, XLTI High Temperature, PXI 350, XXT, XLTI Atex, PXI 500, XXT High Temperature, XLTI Chemical, XLTI Stainless Steel Chemical, PXI Heavy Duty |
| ZG66160 | Interpump flexible coupling, IEC 160, 42 mm motor shaft | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
Starter
Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.
Contactor
KNL22 contactors, rated 11 kW AC-3 at 400 V
| Coil | Type | Iskra code | Suppliers |
|---|---|---|---|
| 24 V AC B7 | KNL22-00 | 030050609000 | |
| 42 V AC D7 | KNL22-00 | 030050683000 | |
| 48 V AC E7 | KNL22-00 | 030050684000 | |
| 110-125 V AC F7 | KNL22-00 | 030050685000 | |
| 220-240 V AC M7 | KNL22-00 | 030050470000 | |
| 380-415 V AC Q7 | KNL22-00 | 030050686000 | |
| 440-460 V AC R7 | KNL22-00 | 030050922000 | |
| 480-520 V AC S7 | KNL22-00 | 030050687000 | |
| 24 V DC BD | KNL22G-00 | 030052143000 |
Overload protection
Set to the motor's full-load current, 21.9 A.
Other motors in this range
RN 63a2RN 63b2RN 63c2RN 71a2RN 71b2RN 71c2RN 80a2RN 80b2RN 80c2RN 90La2RN 90Lb2RN 90Sa2RN 90Sb2RN 100a2RN 100b2RN 112a2RN 112b2RN 112c2RN 132Ma2RN 132Mb2RN 132Sa2RN 132Sb2RN 160La2RN 160Lb2RN 160Mb2RN 180La2RN 180Ma2RN 200a2RN 200b2