RRV plunger pump
RRV 4G40 H D + flange ø 1”
Part number 24935
- 15.1Flow, l/min
- 275Pressure, bar
- 3400Speed, rpm
- 8.2Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 15.1 l/min
- Pressure
- 275 bar
- Speed
- 3400 rpm
- Absorbed power
- 8.2 kW
- Weight
- 8.4 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 1828 | Valve kit |
Other kits3
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2191 | Support ring kit, Ø15 mm | ||
| KIT 42550 | O-ring kit | ||
| KIT 42557 | Plunger guide kit, Ø15 mm |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2739 | Plunger kit, Ø15 mm |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42555 | Oil seal kit |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42556 | Water seal kit, Ø15 mm |
Exploded view
Parts list
Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 960850 | Plug | 6 | |
| 2 | 960162 | O-ring Ø 17,86x2,62 | 6 | KIT 42550 |
| 3 | 889052 | Complete valve | 6 | KIT 1828 |
| 4 | 800860 | Screw TCEI M8x55 | 8 | |
| 5 | 1381850 | Washer | 8 | |
| 6 | 3220770 | Head nickel-plated | 1 | |
| 7 | 180101 | O-ring Ø 17,5x2 | 1 | KIT 42550 |
| 8 | 960870 | Plug 1/2" G nickel-plated | 1 | |
| 9 | 740290 | O-ring Ø 14x1,78 | 1 | KIT 42550 |
| 10 | 1981180 | Plug 3/8" G nickel-plated | 1 | |
| 11 | 1380690 | Plug 1/4" G nickel-plated | 1 | |
| 12 | 820510 | O-ring Ø 10,82x1,78 | 1 | |
| 13 | 2760220 | Ring Ø 15 | 3 | KIT 2191 |
| 14 | 1342761 | Water seal Ø 15 | 3 | KIT 42556 |
| 15 | 3200680 | Ring | 3 | KIT 42556 |
| 16 | 3220150 | Piston guide Ø 15 | 3 | KIT 42557 |
| 17 | 3200690 | Gasket Ø 15 | 3 | KIT 42556 |
| 18 | 3200700 | Ring | 3 | KIT 42556 |
| 19 | 770260 | O-ring Ø 23,52x1,78 | 3 | KIT 42550, KIT 42556 |
| 20 | 3220140 | Piston guide Ø 15 | 3 | KIT 42557 |
| 21 | 1260110 | Nut | 3 | |
| 22 | 1260100 | Washer | 3 | |
| 23 | 1780070 | Piston Ø 15 | 3 | KIT 2739 |
| 24 | 1260091 | Plate | 3 | |
| 25 | 1260460 | Oil seal | 3 | KIT 42555 |
| 26 | 3220010 | Pump body | 1 | |
| 27 | 880130 | Plug | 1 | |
| 28 | 480480 | O-ring Ø 4,48x1,78 | 3 | KIT 42550 |
| 29 | 3220060 | Piston | 3 | |
| 30 | 3220070 | Pin | 3 | |
| 31 | 3220560 | Connecting-rod | 3 | |
| 32 | 651540 | O-ring Ø 107,62x2,62 | 1 | KIT 42550 |
| 33 | 3220030 | Cover | 1 | |
| 34 | 3200220 | Screw TCEI 6x16 | 4 | |
| 35 | 820510 | O-ring Ø 10,82x1,78 | 1 | KIT 42550 |
| 36 | 880581 | Plug 1/4" G | 1 | |
| 37 | 1200430 | Screw TCEI M6x16 | 4 | |
| 38 | 3200070 | Support | 1 | |
| 42 | 650560 | O-ring Ø 56,82x2,62 | 1 | KIT 42550 |
| 43 | 200390 | Ring | 1 | |
| 44 | 1981210 | Bearing | 1 | |
| 45 | 3200210 | Foot | 2 | |
| 46 | 1322640 | Washer | 4 | |
| 47 | 850250 | Screw TCEI M8x12 | 4 | |
| 53 | 880830 | O-ring Ø 15,54x2,62 | 6 | KIT 1828 |
| 54 | 1080550 | Ring | 3 | |
| 56 | 3220780 | Ring Ø 61,8x57,8 | 1 | |
| 60 | 1260770 | Ring | 1 | |
| 61 | 3220240 | Shaft | 1 | |
| 62 | 820440 | Screw M6x6 | 1 | |
| 63 | 3220260 | Bearing | 1 | |
| 64 | 3220430 | O-ring Ø 56,87x1,78 | 1 | |
| 65 | 3220270 | Ring | 1 | KIT 42555 |
| 68 | 3220250 | Flange | 1 | |
| 70 | 780060 | Screw TCEI M6x25 | 4 | |
| 71 | 3229203 | Head assembly | 1 | |
| 72 | 3229603 | Oil level assembly | 1 |
Motor
Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 8.2 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160Ma2 | 11 | 2950 | IEC 160M | IE3 | 19.7 | |
| RN 160Ma2 | 11 | 2930 | IEC 160M | IE1 | 21.9 | |
| RN 132Ma2 uprated | 9.2 | 2920 | IEC 132M | IE1 | 18 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Ma2) No Annovi Reverberi flange listed for this motor.
- IEC 160, 42 mm shaft (RNE 160Ma2, RN 160Ma2) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 38 mm motor shaft to the pump shaft.
- IEC 160, 42 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 42 mm motor shaft to the pump shaft.
Other Annovi Reverberi RRV pumps
RRV 3.5G20 E + flange ø 5/8”RRV 3.5G25 D + flange Ø 3/4”RRV 3.5G36 D + flange ø 1”RRV 3G25 E + flange ø 5/8”RRV 3G27 D + flange ø 3/4”RRV 3G30 D + flange ø 1”RRV 3G36 D + flange ø 1”RRV 4G36 D + flange ø 1”