three-phase motor, IE3
RNE 160Ma2
- 11Power, kW
- 2950Speed, rpm
- 2Poles
- 160MIEC frame
- 19.7Amps at 400 V
Specification
- Rated output
- 11 kW
- Speed
- 2950 rpm (2-pole)
- Supply
- 230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
- Current at 400 V
- 19.7 A
- Efficiency
- 91.2%, IE3
- Power factor
- 0.89
- Starting current
- 9.1 × rated
- Torque
- 35.6 Nm
- Frame
- IEC 160M
- Shaft end
- 42 × 110 mm
- Large flange (B5)
- FF300
- Small flange (B14)
- None for this frame
- Weight (B3)
- 87.8 kg
Pumps it drives
Pumps rated at this motor's speed that need no more than 11 kW, where this is the smallest motor that does the job.
Hawk NPM-GR 2
Interpump 53 E1 series 1
Interpump 58 E2 series 1
Interpump 59 E3 series 3
Mazzoni MMD-EDM-E4 4
MMD-EDM E4 16275LMMD-EDM E4 16275RMMD-EDM E4 18275LMMD-EDM E4 18275R
Annovi Reverberi RKV 3
RKV 4.5G40H D+F41 code 21134RKV 4G40H D+F41 code 21133RKV 5.5G40H D+F41 code 21135
Annovi Reverberi RRV 1
Annovi Reverberi RSV 1
Comet EWD 1
Comet EWD-K 2
Flanges and couplings
For an IEC 160 frame with a 42 mm shaft, bolting to the large flange (B5). Pick the one made for your pump series.
| Part number | Description | For pump series |
|---|---|---|
| 1.099-532.0 | Hawk motor flange, IEC 160 B5 | XLTI, XLTI High Temperature, PXI 350, XXT, XLTI Atex, PXI 500, XXT High Temperature, XLTI Chemical, XLTI Stainless Steel Chemical, PXI Heavy Duty |
| C14 | Udor motor flange C14, IEC 160 B3/B5, up to 15 kW | C, CS, CWT, CK, CX, CH |
| NK01 | Udor motor flange NK01, IEC 160 B3/B5, up to 15 kW | NK, NKS, NH |
| 1.905-878.0 | Hawk flexible coupling, IEC 160, 42 mm motor to 30 mm pump | MXT, MXT High Temperature, MPX 350, MPX 500, MXT Chemical, MPX Heavy Duty, MXT Stainless Steel Chemical, MXT High Flow |
| 1.905-890.0 | Hawk flexible coupling, IEC 160, 42 mm motor to 24 mm pump | XLTI, XLTI High Temperature, PXI 350, XXT, XLTI Atex, PXI 500, XXT High Temperature, XLTI Chemical, XLTI Stainless Steel Chemical, PXI Heavy Duty |
| ZG66160 | Interpump flexible coupling, IEC 160, 42 mm motor shaft | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
Starter
Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.
Contactor
KNL22 contactors, rated 11 kW AC-3 at 400 V
| Coil | Type | Iskra code | Suppliers |
|---|---|---|---|
| 24 V AC B7 | KNL22-00 | 030050609000 | |
| 42 V AC D7 | KNL22-00 | 030050683000 | |
| 48 V AC E7 | KNL22-00 | 030050684000 | |
| 110-125 V AC F7 | KNL22-00 | 030050685000 | |
| 220-240 V AC M7 | KNL22-00 | 030050470000 | |
| 380-415 V AC Q7 | KNL22-00 | 030050686000 | |
| 440-460 V AC R7 | KNL22-00 | 030050922000 | |
| 480-520 V AC S7 | KNL22-00 | 030050687000 | |
| 24 V DC BD | KNL22G-00 | 030052143000 |
Overload protection
Set to the motor's full-load current, 19.7 A.
Other motors in this range
RNE 80a2RNE 80b2RNE 90La2RNE 90Sa2RNE 100a2RNE 112a2RNE 132Sa2RNE 132Sb2RNE 160La2RNE 160Mb2