PumpLookupPump and motor part numbers
Mains Units

EWD-K plunger pump

EWD-K 4040 S

Part number 6311 0158

  • 15Flow, l/min
  • 276Pressure, bar
  • 3400Speed, rpm
  • 8.2Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Comet EWD-K pump

Specification

Flow
15 l/min
Pressure
276 bar
Speed
3400 rpm
Absorbed power
8.2 kW
Shaft
Solid, Ø24 mm
Weight
5.7 kg

Data sheet (PDF, Comet)

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
2409.0260Plunger kit1 

Oil seals2

Part numberDescriptionPer pumpSuppliers
5019.0285Oil seal kit1 
5019.0304Oil seal kit1 

Water seals1

Part numberDescriptionPer pumpSuppliers
5019.0708Water seal kit1 

Valves2

Part numberDescriptionPer pumpSuppliers
5025.0075Valve kit1 
5025.0100Valve kit1 

Exploded view

Comet exploded view of the EWD-K pump, with position numbers
Comet's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Comet's exploded view.

PosPart numberDescriptionQty
1 3202.0018 Cap G1/81
2 3200.0007 Cap G3/81
2 3202.0467 Cap 1/4”1
3 2811.0084 Washer Ø17x22x1,51
4 3218.0531 Pump Manifold1
4 3218.0542 Pump Manifold1
5 3609.0090 Screw M8x458
6 1210.0415 O-Ring Ø1,78x12,423
7 3009.0170 Suction Valve Seat3
8 3604.0028 Suction Valve3
8 3604.0066 Suction Valve LAM=1,23
9 1802.0192 Suction Spring3
10 1205.0078 Suction Valve Cage3
10 1205.0033 Suction Valve Cage3
11 1220.0194 Suction Valve Ass.y Kit3
11 1220.0224 Suction Valve Ass.y Kit3
12 1210.0669 O-Ring Ø1,78x17,173
13 3202.0441 Suction Cap Kit3
14 3202.0018 Cap G1/81
15 2409.0154 Check Valve Kit1
16 1210.0446 O-Ring Ø2,4x4,31
17 2409.0086 Check Valve1
17 2409.0299 Check Valve1
18 1802.0197 Spring1
19 1210.0049 O-Ring Ø1,78x12,421
20 1210.0040 O-Ring Ø1,78x15,61
21 3410.0318 Injector Body Kit Ø1,81
22 2803.0435 Detergent Coupling Kit1
23 1802.0180 Detergent Spring1
24 3003.0024 Detergent Ball 7/321
25 2803.0424 Detergent Coupling1
26 1817.0097 Knob1
27 1215.0326 Reg. Valve Kit + Seat1
27 1215.0667 Reg. Valve Kit + Seat1
28 1210.0465 O-Ring Ø1,78x8,733
29 3009.0143 Delivery Valve Seat3
30 3604.0063 Delivery Valve3
31 1802.0214 Delivery Spring3
32 1205.0085 Delivery Valve Cage3
33 1210.0473 O-Ring Ø1,78x9,253
34 0009.0006 Anti-Extr. Ring3
35 1220.0215 Delivery Valve Ass.y Kit3
36 3202.0279 Delivery Cap3
37 1241.0169 Packing Ø13x20x4,53
38 0009.0729 Packing Retainer Ø133
39 1210.0223 O-Ring Ø1,78x26,73
40 1241.0167 Packing Ø13x20x4,53
41 0019.0095 Oil Seal Ø15x24x53
42 3609.0088 Screw M5x103
43 1004.0012 Crankcase Flange1
44 0402.0360 Trasparent Cover1
45 3019.0011 Outer Seeger Ø201
46 1210.0386 O-Ring Ø3,53x44,041
47 0009.0275 Spacer Ø41x51,8x0,51
48 0438.0137 Ball Bearing Ø20x52x151
49 3202.0435 Cap3
50 0403.0406 Pump Crankcase1
50 0403.0534 Pump Crankcase1
51 3605.0152 Special Screw M5x453
52 2811.0235 Washer Ø5,2x11,7x0,33
53 0202.0137 Ceramic Bushing Ø133
54 2812.0129 Washer3
55 2409.0291 Piston Guide3
56 3011.0014 Gudgeon Pin Ø8x253
57 0205.0103 Con. Rod3
58 0402.0537 Plug Cover1
59 3202.0434 Breather Plug1
60 1210.0056 O-Ring Ø2,62x9,131
61 1210.0557 O-Ring Ø3x91
62 3202.0220 Plug1
63 3625.0062 Screw M6x204
64 0402.0530 Crankcase Cover1
65 1210.0769 O-Ring Ø2x1001
66 2404.0218 Plate1
67 3625.0051 Screw M6x161
68 3016.0037 Flange1
69 3609.0032 Screw M6x204
70 0019.0102 Oil Seal Ø40x62x71
71 0437.0091 Roller Bearing Ø45x52x161
72 0001.0993 Eccentric Shaft1
73 3202.0440 Drilled Cap3
75 1602.0045 Key 8x7x251
76 0438.0075 Ball Bearing Ø25x62x171
77 3019.0006 Outer Seeger Ø251
78 3020.0012 Inner Seeger Ø621
79 0019.0094 Oil Seal Ø25x62x10/71
80 0001.0996 Eccentric Shaft1
81 1210.0446 O-Ring Ø2,4x4,31
82 2409.0299 Check Valve1
83 3410.0389 Ejector D.2,51
84 1802.0373 Spring1
85 2803.3443 Discharge fitting 3/8”1
86 3410.0388 Discharge fitting Kit1

Motor

Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 8.2 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160Ma2 112950IEC 160MIE319.7  
RN 160Ma2 112930IEC 160MIE121.9  
RN 132Ma2 uprated 9.22920IEC 132MIE118  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 132, 38 mm shaft (RN 132Ma2) No Comet flange listed for this motor.
  • IEC 160, 42 mm shaft (RNE 160Ma2, RN 160Ma2) No Comet flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 132, 38 mm motor shaft No Comet coupling listed: you need one for a 38 mm motor shaft to 24 mm pump shaft.
  • IEC 160, 42 mm motor shaft No Comet coupling listed: you need one for a 42 mm motor shaft to 24 mm pump shaft.

Other Comet EWD-K pumps

EWD-K 3540 GEWD-K 3540 GEWD-K 4040 GEWD-K 4040 GEWD-K 4040 S