PumpLookupPump and motor part numbers
Mains Units

RRV plunger pump

RRV 3G27 D + flange ø 3/4”

Part number 23787

  • 11.4Flow, l/min
  • 186Pressure, bar
  • 3400Speed, rpm
  • 4Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi RRV pump

Specification

Flow
11.4 l/min
Pressure
186 bar
Speed
3400 rpm
Absorbed power
4 kW
Weight
8 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 1828Valve kit 

Other kits3

Part numberDescriptionPer pumpSuppliers
KIT 2191Support ring kit, Ø15 mm 
KIT 42550O-ring kit 
KIT 42557Plunger guide kit, Ø15 mm 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2739Plunger kit, Ø15 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 42555Oil seal kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42556Water seal kit, Ø15 mm 

Exploded view

Annovi Reverberi exploded view of the RRV pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960090 Plug6
2 960160 O-ring Ø 17,86x2,626 KIT 42550
3 889052 Complete valve6 KIT 1828
4 800860 Screw TCEI M8x558
5 1381850 Washer8
6 3220090 Head1
7 180101 O-ring Ø 17,5x21 KIT 42550
8 820361 Plug 1/2" G brass1
9 740290 O-ring Ø 14x1,781 KIT 42550
10 1980740 Plug 3/8" G brass1
11 880581 Plug 1/4" G1
12 820510 O-ring Ø 10,82x1,781
13 2760220 Ring Ø 153 KIT 2191
14 1342761 Water seal Ø 153 KIT 42556
15 3200680 Ring3 KIT 42556
16 3220150 Piston guide Ø 153 KIT 42557
17 3200690 Gasket Ø 153 KIT 42556
18 3200700 Ring3 KIT 42556
19 770260 O-ring Ø 23,52x1,783 KIT 42550, KIT 42556
20 3220140 Piston guide Ø 153 KIT 42557
21 1260110 Nut3
22 1260100 Washer3
23 1780070 Piston Ø 153 KIT 2739
24 1260091 Plate3
25 1260460 Oil seal3 KIT 42555
26 3220010 Pump body1
27 880130 Plug1
28 480480 O-ring Ø 4,48x1,783 KIT 42550
29 3220060 Piston3
30 3220070 Pin3
31 3220040 Connecting-rod3
32 651540 O-ring Ø 107,62x2,621 KIT 42550
33 3220030 Cover1
34 3200220 Screw TCEI 6x164
35 820510 O-ring Ø 10,82x1,781 KIT 42550
36 880581 Plug 1/4" G1
37 1200430 Screw TCEI M6x164
38 3200070 Support1
42 650560 O-ring Ø 56,82x2,621 KIT 42550
43 200390 Ring1
44 1981210 Bearing1
45 3200210 Foot2
46 1322640 Washer4
47 850250 Screw TCEI M8x124
53 880830 O-ring Ø 15,54x2,626 KIT 1828
54 1080550 Ring3
56 3220780 Ring Ø 61,8x57,81
60 1260770 Ring1
61 3220500 Shaft1
62 820440 Screw M6x61
63 3220260 Bearing1
64 3220430 O-ring Ø 56,87x1,781
65 3220270 Ring1 KIT 42555
66 780060 Screw TCEI M6x254
69 3220230 Flange1
70 780330 Screw TCEI M6x204
71 3229201 Head assembly1
72 3229603 Oil level assembly1

Motor

Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 4 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 112a2 42910IEC 112IE37  
RN 112a2 42895IEC 112IE17.8  
RN 100b2 uprated 42850IEC 100IE18  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RN 100b2) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNE 112a2, RN 112a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi RRV pumps

RRV 3.5G20 E + flange ø 5/8”RRV 3.5G25 D + flange Ø 3/4”RRV 3.5G36 D + flange ø 1”RRV 3G25 E + flange ø 5/8”RRV 3G30 D + flange ø 1”RRV 3G36 D + flange ø 1”RRV 4G36 D + flange ø 1”RRV 4G40 H D + flange ø 1”