PumpLookupPump and motor part numbers
Mains Units

three-phase motor, IE1

RN 200a2

  • 30Power, kW
  • 2955Speed, rpm
  • 2Poles
  • 200IEC frame
  • 54Amps at 400 V
Nicolini three-phase motor

Specification

Rated output
30 kW
Speed
2955 rpm (2-pole)
Supply
230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
Current at 400 V
54 A
Efficiency
92.3%, IE1
Power factor
0.87
Starting current
6.7 × rated
Torque
97 Nm
Frame
IEC 200
Shaft end
55 × 110 mm
Large flange (B5)
FF350
Small flange (B14)
None for this frame
Weight (B3)
175 kg

Pumps it drives

No pump here has this motor as its first match.

Flanges and couplings

For an IEC 200 frame with a 55 mm shaft, bolting to the large flange (B5). Pick the one made for your pump series.

Part numberDescriptionFor pump series
NK03Udor motor flange NK03, IEC 200 B3/B5, up to 37 kWNK, NKS, NH
VX02Udor motor flange VX02, IEC 200 B3/B5, up to 37 kWPENTA, VX, VXS, VH, VY
9.853-336.0Hawk flexible coupling, IEC 200, 55 mm motor to 30 mm pumpMXT, MXT High Temperature, MPX 350, MPX 500, MXT Chemical, MPX Heavy Duty, MXT Stainless Steel Chemical, MXT High Flow

Starter

Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.

Contactor

KNL63 contactors, rated 30 kW AC-3 at 400 V

CoilTypeIskra codeSuppliers
24 V AC B7KNL63-11 1NO+1NC030050490000 
42 V AC D7KNL63-11 1NO+1NC030050949000 
48 V AC E7KNL63-11 1NO+1NC030050950000 
110-125 V AC F7KNL63-11 1NO+1NC030050856000 
220-240 V AC M7KNL63-11 1NO+1NC030050499000 
380-415 V AC Q7KNL63-11 1NO+1NC030050951000 
440 V AC R7KNL63-11 1NO+1NC030050952000 
480-500 V ACKNL63-11 1NO+1NC030050953000 

Overload protection

Set to the motor's full-load current, 54 A.

Other motors in this range

RN 63a2RN 63b2RN 63c2RN 71a2RN 71b2RN 71c2RN 80a2RN 80b2RN 80c2RN 90La2RN 90Lb2RN 90Sa2RN 90Sb2RN 100a2RN 100b2RN 112a2RN 112b2RN 112c2RN 132Ma2RN 132Mb2RN 132Sa2RN 132Sb2RN 160La2RN 160Lb2RN 160Ma2RN 160Mb2RN 180La2RN 180Ma2RN 200b2