three-phase motor, IE1
RN 132Mb2
uprated
- 11Power, kW
- 2920Speed, rpm
- 2Poles
- 132MIEC frame
- 20.9Amps at 400 V
Specification
- Rated output
- 11 kW
- Speed
- 2920 rpm (2-pole)
- Supply
- 230/400 V 50 Hz, three-phase. Also wound for 60 Hz and other voltages to order; the figures here are at 50 Hz.
- Current at 400 V
- 20.9 A
- Efficiency
- 86.4%, IE1
- Power factor
- 0.88
- Starting current
- 6.5 × rated
- Torque
- 36 Nm
- Frame
- IEC 132M
- Shaft end
- 38 × 80 mm
- Large flange (B5)
- FF265
- Small flange (B14)
- FT165
- Weight (B3)
- 56 kg
Uprated: Nicolini mark this power as one IEC does not list for the frame. It gives more power in a smaller frame, at lower efficiency.
Pumps it drives
Pumps rated at this motor's speed that need no more than 11 kW, where this is the smallest motor that does the job.
Interpump 59 E3 series 1
Mazzoni MMD-EDM-E4 2
MMD-EDM E4 18275LMMD-EDM E4 18275R
Annovi Reverberi RKV 1
Flanges and couplings
For an IEC 132 frame with a 38 mm shaft, bolting to the small flange (B14). Pick the one made for your pump series.
| Part number | Description | For pump series |
|---|---|---|
| 1.099-531.0 | Hawk motor flange, IEC 132 B14 | NMT, NPM, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NPM Nickel-Plated, XLTI, XLTI High Temperature, PXI 350, XXT, NLTI, XLTI Atex, PXI 500, NMT - Car Wash Heavy Duty, NMT Chemical, XLTI Chemical, XLTI Stainless Steel Chemical, NMT Stainless Steel Chemical, PXI Heavy Duty |
| BC10 | Udor motor flange BC10, IEC 132 B3/B14, up to 11 kW | B, BS, BCW, BWT, BK, C, CS, CWT, CK, CX, CH |
| ZF132 | Interpump motor flange, IEC 132 B14 | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
| 1.099-545.0 | Hawk flexible coupling, IEC 132, 38 mm motor to 24 mm pump | NMT, NPM, NMT Car Wash, NMT High Temperature, NMT Nickel-Plated, NPM Nickel-Plated, XLTI, XLTI High Temperature, PXI 350, XXT, NLTI, XLTI Atex, PXI 500, NMT - Car Wash Heavy Duty, NMT Chemical, XLTI Chemical, XLTI Stainless Steel Chemical, NMT Stainless Steel Chemical, PXI Heavy Duty |
| ZG132 | Interpump flexible coupling, IEC 132, 38 mm motor to 24 mm pump | 47, 47VHT, 66, 66VHT, 66SS, E3, C3W and SS3 |
Starter
Iskra parts for a direct-on-line starter at 400 V. Choose the contactor coil to match your control voltage.
Contactor
KNL22 contactors, rated 11 kW AC-3 at 400 V
| Coil | Type | Iskra code | Suppliers |
|---|---|---|---|
| 24 V AC B7 | KNL22-00 | 030050609000 | |
| 42 V AC D7 | KNL22-00 | 030050683000 | |
| 48 V AC E7 | KNL22-00 | 030050684000 | |
| 110-125 V AC F7 | KNL22-00 | 030050685000 | |
| 220-240 V AC M7 | KNL22-00 | 030050470000 | |
| 380-415 V AC Q7 | KNL22-00 | 030050686000 | |
| 440-460 V AC R7 | KNL22-00 | 030050922000 | |
| 480-520 V AC S7 | KNL22-00 | 030050687000 | |
| 24 V DC BD | KNL22G-00 | 030052143000 |
Overload protection
Set to the motor's full-load current, 20.9 A.
Other motors in this range
RN 63a2RN 63b2RN 63c2RN 71a2RN 71b2RN 71c2RN 80a2RN 80b2RN 80c2RN 90La2RN 90Lb2RN 90Sa2RN 90Sb2RN 100a2RN 100b2RN 112a2RN 112b2RN 112c2RN 132Ma2RN 132Sa2RN 132Sb2RN 160La2RN 160Lb2RN 160Ma2RN 160Mb2RN 180La2RN 180Ma2RN 200a2RN 200b2