PumpLookupPump and motor part numbers
Mains Units

SJV plunger pump

SJV 2 G25 D + F7

Part number 21663

  • 7.6Flow, l/min
  • 170Pressure, bar
  • 3400Speed, rpm
  • 2.6Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi SJV pump

Specification

Flow
7.6 l/min
Pressure
170 bar
Speed
3400 rpm
Absorbed power
2.6 kW
Weight
4.7 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2167Water seal kit, Ø15 mm 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2513Plunger kit, Ø15 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2591Oil seal kit 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2799O-ring kit 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2869Valve kit 

Exploded view

Annovi Reverberi exploded view of the SJV pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 1981780 Knob1
2 1980300 Nut1
3 1980470 Screw M6x201
4 1980390 Insert1
5 1080070 Pin2
6 1980220 Wobble plate2
7 1271070 Spring1
8 1080041 Piston1
9 1080401 Ring1
10 1080250 O-ring Ø 7,66x1,781
11 1980210 Piston guide1
12 880830 O-ring Ø 15,54x2,627 KIT 2869
13 740290 O-ring Ø 14x1,781
14 800560 O-ring Ø 8,73x1,781
15 1271170 Ring1
16 1080190 O-ring Ø 2,90x1,782
17 1271160 Piston1
18 1980200 Seat1
19 1470210 O-ring Ø 9x11 KIT 2799
20 880581 Plug 1/4" G2
21 820510 O-ring Ø 10,82x1,782 KIT 2799
22 620301 Plug 1/8" G1
23 1980310 Screw TCEI M10x653
24 650530 Washer3
25 1982450 Head1
26 1260162 Plug3
27 960160 O-ring Ø 17,86x2,623 KIT 2799
28 1269050 Complete valve3 KIT 2869
29 1982520 Hose tail Ø 81
30 480480 O-ring Ø 4,48x1,781 KIT 2799
31 1250280 Ball1 KIT 2799
32 1560520 Spring1 KIT 2799
33 1460430 O-ring Ø 4x2,51 KIT 2799
34 1540170 Shutter nickel-plated1
35 1080091 Spring1
36 394280 O-ring Ø 12,42x1,781 KIT 2799
37 1200690 O-ring Ø 15,6x1,781 KIT 2799
38 1270141 Injector1
40 1989050 Complete valve3 KIT 2869
41 1342761 Water seal Ø 153 KIT 2167
42 1981570 Piston guide Ø 153
43 770260 O-ring Ø 23,52x1,783 KIT 2167
44 1260440 Water seal Ø 153 KIT 2167
45 1981580 Ring3 KIT 2167
46 1980410 Oil seal3 KIT 2591
47 770090 O-ring Ø 5,28x1,781 KIT 2591
48 1983050 Pump body1
49 740290 O-ring Ø 14x1,781 KIT 2799
50 1980380 Plug1
53 180030 Screw TCEI M8x204
54 1981140 Spring3
55 1981120 Piston Ø 153 KIT 2513
56 1980150 Ring3
57 1983100 Fifth wheel1
58 1980250 Fifth wheel1
59 1980240 Fifth wheel1
61 1982710 Shaft1
63 1980340 O-ring Ø 83,8x2,621 KIT 2799
64 1981420 Flange1
65 1982360 Bearing1
66 1140380 Ring1 KIT 2591
67 1980430 Spacer3
77 1981130 Wobble plate3
78 1981770 Plug1

Motor

Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 2.6 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100a2 32900IEC 100IE35.6  
RN 100a2 32880IEC 100IE16.2  
RN 90Lb2 uprated 32890IEC 90LIE16.3  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RN 90Lb2) No Annovi Reverberi flange listed for this motor.
  • IEC 100, 28 mm shaft (RNE 100a2, RN 100a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi SJV pumps

SJV 2.5 G25 D + F7SJV 3 G27 D + F7SJV 3.5 G25 D + F7