PumpLookupPump and motor part numbers
Mains Units

XTS plunger pump

XTS 11.14 C

Part number 7069

  • 11Flow, l/min
  • 140Pressure, bar
  • 2800Speed, rpm
  • 3Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi XTS pump

Specification

Flow
11 l/min
Pressure
140 bar
Speed
2800 rpm
Absorbed power
3 kW
Weight
5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 1860Oil seal kit 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 1864Valve kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 1866Water seal kit, Ø15 mm 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2628Plunger kit, Ø15 mm 

Exploded view

Annovi Reverberi exploded view of the XTS pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 680570 Screw TCEI M6x606
1 1322730 Screw TCEI M6x606
2 1381550 Washer6
3 1260162 Plug6
3 1260161 Plug - C=34Nm 1/8”G
4 960160 O-ring Ø 17,86x2,626
5 1269050 Complete valve6 KIT 1864
6 880830 O-ring Ø 15,54x2,626 KIT 1864
7 620301 Plug 1/8" G1
7 1260021 Head1
8 1320022 Head1
8 1262226 Head1
9 180101 O-ring Ø 17,5x21
10 820361 Plug 1/2" G brass1
11 1980740 Plug 3/8" G brass1
12 740290 O-ring Ø 14x1,782
12 1260140 Ring Ø153
13 1260141 Ring Ø153 KIT 1866
13 1520120 Ring Ø153 KIT 1866
14 1271650 Water seal Ø 153 KIT 1866
15 1260151 Piston guide Ø 153
16 1260420 O-ring Ø 26,70x1,783 KIT 1866
17 1260440 Water seal3 KIT 1866
18 1260460 Oil seal3 KIT 1860
19 1320010 Pump body1
20 1320330 Bushing1
21 1320370 Bearing1
22 1260790 Ring1
23 1266740 Oil seal1 KIT 1860
24 880130 Plug1
25 1260110 Nut3 KIT 2628
26 1260100 Washer3 KIT 2628
27 1260120 Piston Ø 153 KIT 2628
28 480480 O-ring Ø 4,48x1,783 KIT 2628
29 1260091 Plate3 KIT 2628
30 1260070 Piston3
31 1260080 Pin3
32 1260060 Connecting-rod3
32 1320140 Connecting-rod3
33 1260040 Oil seal1 KIT 1860
34 1260430 Ring1
35 1780690 Plate1
36 1260250 Level gauge1
37 1140450 O-ring Ø 20,24x2,621
38 1269101 Cover1
38 1329010 Cover1
39 1260760 Screw TCEI M5x206
40 1980740 Plug 3/8" G brass1
41 1263890 Foot2
42 1260470 Screw TE M8x104
43 390430 Screw TE M6x251
44 780230 Washer1
44 1321180 Shaft1
45 1321170 Shaft1
45 1321160 Shaft1
46 1321190 Bearing1
47 1321080 Ring1
48 480671 Oil seal1 KIT 1860
48 1269218 Head assembly1 KIT 1860
49 1269221 Head assembly1
49 1269246 Head assembly1

Motor

A 2-pole motor of at least 3 kW drives this pump at 2800 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100a2 32900IEC 100IE35.6  
RN 100a2 32880IEC 100IE16.2  
RN 90Lb2 uprated 32890IEC 90LIE16.3  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RN 90Lb2) No Annovi Reverberi flange listed for this motor.
  • IEC 100, 28 mm shaft (RNE 100a2, RN 100a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi XTS pumps

XTS 8.10 CXTS 8.15 NXTS 10.15 NXTS 11.15 NXTS 13.12 CXTS 13.15 N