JRV plunger pump
JRV 3G20 D TA + F7
Part number 27687
- 11.4Flow, l/min
- 140Pressure, bar
- 3400Speed, rpm
- 3Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 11.4 l/min
- Pressure
- 140 bar
- Speed
- 3400 rpm
- Absorbed power
- 3 kW
- Weight
- 3.5 kg
Kits
No kits are listed for this model. A supplier can look them up from the model JRV 3G20 D TA + F7.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model JRV 3G20 D TA + F7 and part number 27687.
Motor
Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 3 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 100a2 | 3 | 2900 | IEC 100 | IE3 | 5.6 | |
| RN 100a2 | 3 | 2880 | IEC 100 | IE1 | 6.2 | |
| RN 90Lb2 uprated | 3 | 2890 | IEC 90L | IE1 | 6.3 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 90, 24 mm shaft (RN 90Lb2) No Annovi Reverberi flange listed for this motor.
- IEC 100, 28 mm shaft (RNE 100a2, RN 100a2) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
- IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.