PumpLookupPump and motor part numbers
Mains Units

XT plunger pump

XT 10.15 N

Part number 6978

  • 10Flow, l/min
  • 150Pressure, bar
  • 1450Speed, rpm
  • 3Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi XT pump

Specification

Flow
10 l/min
Pressure
150 bar
Speed
1450 rpm
Absorbed power
3 kW
Weight
5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 1864Valve kit 

Water seals2

Part numberDescriptionPer pumpSuppliers
KIT 1866Water seal kit, Ø15 mm 
KIT 42479Water seal kit, Ø18 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 1872Oil seal kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2629Plunger kit, Ø18 mm 

Exploded view

Annovi Reverberi exploded view of the XT pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 680570 Screw TCEI M6x606
1 1322730 Screw TCEI M6x606
1 1260140 Ring Ø 153
1 1260141 Ring Ø 153
1 1320340 Ring Ø 183
2 1381550 Washer6
3 1260162 Plug6
3 1260161 Plug - C=34Nm 1/8”G
4 960160 O-ring Ø 17,86x2,626
5 1269050 Complete valve6 KIT 1864
6 880830 O-ring Ø 15,54x2,626 KIT 1864
7 620301 Plug 1/8" G1
7 1260021 Head1
8 1262226 Head1
8 1320020 Head1
9 180101 O-ring Ø 17,5x21
10 820361 Plug 1/2" G brass1
11 1980740 Plug 3/8" G brass1
12 740290 O-ring Ø 14x1,782
14 1780720 Water seal Ø 183 KIT 1866, KIT 42479
15 1320351 Piston guide Ø 183
16 1260420 O-ring Ø 26,70x1,783 KIT 1866, KIT 42479
17 1260440 Water seal Ø 153 KIT 1866
17 1260450 Water seal Ø 183 KIT 42479
18 1260460 Oil seal3 KIT 1872
19 1320010 Pump body1
20 1320330 Bushing1
21 1320370 Bearing1
22 1260790 Ring1
23 1266740 Oil seal1 KIT 1872
24 880130 Plug1
25 1260110 Nut3 KIT 2629
26 1260100 Washer3 KIT 2629
27 1260210 Piston Ø 183 KIT 2629
28 480480 O-ring Ø 4,48x1,783 KIT 2629
29 1260091 Plate3 KIT 2629
30 1260070 Piston3
31 1260080 Pin3
32 1260060 Connecting-rod3
32 1320140 Connecting-rod3
33 1260040 Oil seal1 KIT 1872
34 1260430 Ring1
35 1780690 Plate1
36 1260250 Level gauge1
37 1140450 O-ring Ø 20,24x2,621
38 1269101 Cover1
38 1329010 Cover1
39 1260760 Screw TCEI M5x206
40 1980740 Plug 3/8" G brass1
41 1263890 Foot2
42 1260470 Screw TE M8x104
43 1260180 Shaft1
43 1260190 Shaft1
43 1260200 Shaft1
43 1320260 Shaft1
44 1380520 Key1
45 1320370 Bearing1
46 1260790 Ring1
47 1260750 Ring1 KIT 1872
48 1269218 Head assembly1
48 1269250 Head assembly1
48 1269222 Head assembly1
48 1269219 Head assembly1

Motor

A 4-pole motor of at least 3 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100b4 31440IEC 100IE36.8  
RN 100b4 31420IEC 100IE16.4  
RNM 100c4 31410IEC 100Single-phase17 at 230 V  
RNM 112c4 31415IEC 112Single-phase18.5 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RNE 100b4, RN 100b4, RNM 100c4) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNM 112c4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi XT pumps

XT 8.14 CXT 8.15 NXT 9.14 CXT 9.15 NXT 11.14 CXT 11.15 NXT 13.15 N