RCS plunger pump
RCS 8.17 N
Part number 23667
- 8Flow, l/min
- 170Pressure, bar
- 2800Speed, rpm
- 2.2Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 8 l/min
- Pressure
- 170 bar
- Speed
- 2800 rpm
- Absorbed power
- 2.2 kW
- Weight
- 5 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2186 | Valve kit |
Other kits2
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42468 | Oil seal kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42475 | Plunger kit, Ø15 mm |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42476 | Water seal kit, Ø15 mm |
Exploded view
Parts list
Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 3200110 | Plug | 6 | |
| 2 | 1200690 | O-ring Ø 15,6x1,78 | 6 | KIT 42470 |
| 3 | 2769050 | Complete valve | 6 | KIT 2186 |
| 4 | 800410 | Screw TCEI M6x40 | 8 | |
| 5 | 1381550 | Washer | 8 | |
| 6 | 3200100 | Head | 1 | |
| 7 | 180101 | O-ring Ø 17,5x2 | 1 | KIT 42470 |
| 8 | 820361 | Plug 1/2" G brass | 1 | |
| 9 | 740290 | O-ring Ø 14x1,78 | 1 | KIT 42470 |
| 10 | 1980740 | Plug 3/8" G brass | 1 | |
| 11 | 2760220 | Ring Ø 15 | 3 | KIT 2191 |
| 12 | 1342761 | Gasket Ø 15 | 3 | KIT 42476 |
| 13 | 3200160 | Piston guide Ø 15 | 3 | |
| 14 | 3200690 | Gasket Ø 15 | 3 | KIT 42476 |
| 15 | 3200700 | Ring | 3 | KIT 42476 |
| 16 | 770590 | O-ring Ø 21,95x1,78 | 3 | KIT 42470, KIT 42476 |
| 17 | 3200150 | Piston guide Ø 15 | 3 | |
| 18 | 3200010 | Pump body | 1 | |
| 19 | 1780490 | Bearing | 1 | |
| 20 | 1260790 | Ring | 1 | |
| 21 | 1780550 | Ring | 1 | |
| 22 | 395081 | O-ring Ø 47,30x2,62 | 1 | KIT 42470 |
| 25 | 3200070 | Support | 1 | |
| 26 | 1200430 | Screw TCEI M6x16 | 4 | |
| 27 | 3201890 | Plug | 1 | |
| 28 | 1260110 | Nut | 3 | |
| 29 | 1260100 | Washer | 3 | |
| 30 | 1260120 | Piston Ø 15 | 3 | KIT 42475 |
| 31 | 1260091 | Plate | 3 | |
| 32 | 1260460 | Oil seal | 3 | KIT 42468 |
| 33 | 480480 | O-ring Ø 4,48x1,78 | 3 | KIT 42470 |
| 34 | 3200060 | Piston | 3 | |
| 35 | 3200040 | Connecting-rod | 3 | |
| 36 | 1780050 | Pin | 3 | |
| 37 | 2760280 | O-ring Ø 101,27x2,62 | 1 | KIT 42470 |
| 38 | 3200030 | Cover | 1 | |
| 39 | 820510 | O-ring Ø 10,82x1,78 | 1 | KIT 42470 |
| 40 | 880581 | Plug 1/4" G | 1 | |
| 41 | 3200220 | Screw TCEI 6x16 | 4 | |
| 43 | 3200230 | Key | 1 | |
| 44 | 1321190 | Bearing | 1 | |
| 45 | 1260750 | Oil seal | 1 | KIT 42468 |
| 46 | 3200210 | Foot | 2 | |
| 47 | 1322640 | Washer | 4 | |
| 48 | 850250 | Screw TCEI M8x12 | 4 | |
| 49 | 3209201 | Head assembly | 1 | |
| 50 | 3201860 | Ring Ø 51,8x0,5 | 1 | |
| 51 | 3209615 | Oil level assembly | 1 |
Motor
A 2-pole motor of at least 2.2 kW drives this pump at 2800 rpm. Single-phase motors are listed last, for a 230 V supply.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 90La2 | 2.2 | 2880 | IEC 90L | IE3 | 4.6 | |
| RN 90La2 | 2.2 | 2890 | IEC 90L | IE1 | 4.7 | |
| RNM 90Lb2 | 2.2 | 2820 | IEC 90L | Single-phase | 13.1 at 230 V | |
| RNM 100a2 | 2.2 | 2880 | IEC 100 | Single-phase | 14 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 90, 24 mm shaft (RNE 90La2, RN 90La2, RNM 90Lb2) No Annovi Reverberi flange listed for this motor.
- IEC 100, 28 mm shaft (RNM 100a2) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
- IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.