RGP plunger pump
RGP 50.15 N
Part number 28054
- 50Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 15Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 50 l/min
- Pressure
- 150 bar
- Speed
- 1450 rpm
- Absorbed power
- 15 kW
- Weight
- 17.6 kg
Kits
No kits are listed for this model. A supplier can look them up from the model RGP 50.15 N.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model RGP 50.15 N and part number 28054.
Motor
A 4-pole motor of at least 15 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160La4 | 15 | 1465 | IEC 160L | IE3 | 30.5 | |
| RN 160La4 | 15 | 1450 | IEC 160L | IE1 | 30 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 42 mm motor shaft to the pump shaft.