PumpLookupPump and motor part numbers
Mains Units

RGP plunger pump

RGP 70.15 N

Part number 27371

  • 70Flow, l/min
  • 150Pressure, bar
  • 1450Speed, rpm
  • 20Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RGP pump

Specification

Flow
70 l/min
Pressure
150 bar
Speed
1450 rpm
Absorbed power
20 kW
Weight
17.6 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 42835Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 43444Plunger kit, Ø30 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 43445Oil seal kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 43446Water seal kit, Ø30 mm 

Exploded view

Annovi Reverberi exploded view of the RGP pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 1943630 Tappo Plug6
2 390291 Guarnizione OR Ø 28,25x2,62 O-ring6
3 3669051 valve3 KIT 42835
4 3669050 valve3 KIT 42835
7 850260 Vite TCEI M10x90 Screw8
8 650530 Rondella Washer8
13 4020290 Testa Ø 30 Head1
14 1943650 Anello Ø 30,2x40x4,2 Ring3 KIT 43446
15 1943660 Guarnizione 30x40x6 Gasket3 KIT 43446
16 3660500 Anello antiestrusione Ring3 KIT 43446
17 1943670 guide Ø 303
18 1943680 Guarnizione 30x38x5,5 Gasket3 KIT 43446
19 1943700 guide Ø 303
20 1140490 Guarnizione OR Ø 37,82x1,78 O-ring3 KIT 43446
21 1943730 Anello tenuta Ring3 KIT 43445
22 4020010 body1
23 1140370 Tappo Plug1
24 1140410 Cuscinetto Bearing2
25 1941380 Guarnizione OR Ø 66,34x2,62 O-ring2 KIT 43445
26 4020080 Anello Ring1
27 4020070 Disco Plate1
28 4020160 gauge1
29 3680250 Guarnizione OR Ø 45,69x2,62 O-ring1
30 4020100 0.05 mm1
30 4020110 0.10 mm1
30 4020120 0.19 mm1
30 4020130 0.25 mm1
31 4020150 Coperchio Cover1
32 850370 Vite TCEI M8x16 Screw8
33 1941640 Vite TE M6x60 Screw3
34 1340600 Rondella Washer3
35 1943610 Pistone Ø 30 Piston3 KIT 43444
36 1383190 Disco Plate3
37 1940960 Pistone di guida Piston3
38 1943720 Biella alluminio Connecting-rod3
39 1940060 Spina Pin3
40 1940410 Guarnizione OR Ø 132x3 O-ring1 KIT 43445
41 4020030 Coperchio Cover1
42 740290 Guarnizione OR Ø 14x1,78 O-ring1
43 1980740 Tappo 3/8" G ottone Plug1
44 1200430 Vite TCEI M6x16 Screw6
45 1943710 Albero marcato 15 Shaft1
46 650250 Linguetta Key1
48 4020040 Coperchio Cover1
49 820680 Anello tenuta Ring1 KIT 43445
50 4029205 assembly1
51 4029000 Coperchio completo Cover1
52 4029001 Coperchio completo Cover1
53 1940370 Piede Foot2
54 200231 Rondella Washer4
55 1940380 Vite TCEI 10x18 Screw4

Motor

A 4-pole motor of at least 20 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 180La4 221465IEC 180LIE142  
RN 160Lc4 uprated 221450IEC 160LIE142  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RN 160Lc4) No Annovi Reverberi flange listed for this motor.
  • IEC 180, 48 mm shaft (RN 180La4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 42 mm motor shaft to the pump shaft.
  • IEC 180, 48 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 48 mm motor shaft to the pump shaft.

Other Annovi Reverberi RGP pumps

RGP 50.15 NRGP 60.13 N