PumpLookupPump and motor part numbers
Mains Units

RK plunger pump

RK 15.20 H CR B&S VANGUARD code 20886

Part number 20886

  • 15Flow, l/min
  • 200Pressure, bar
  • 1450Speed, rpm
  • 0Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RK pump

Specification

Flow
15 l/min
Pressure
200 bar
Speed
1450 rpm
Weight
46 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Oil seals3

Part numberDescriptionPer pumpSuppliers
KIT 2525Oil seal kit 
KIT 2571Oil seal kit 
KIT 2793Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the RK pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960770 Key1
2 961800 Ring1 KIT 2525, KIT 2571, KIT 2793
2 1941920 Ring1 KIT 2525, KIT 2571, KIT 2793
3 961790 Ring1 KIT 2525, KIT 2571, KIT 2793
4 320240 Ring1 KIT 2525, KIT 2571, KIT 2793
5 961781 Bearing1
6 320240 Ring1 KIT 2525
7 1389001 Pinion1
7 1389000 Pinion1
8 1140370 Plug1
9 1320910 Box1
10 881940 Screw TCEI M8x254
11 1983700 Level gauge 3/8" G1
11 1980290 Level gauge 3/8" G1
12 740290 O-ring Ø 14x1,782 KIT 2525, KIT 2571, KIT 2793
13 1980740 Plug 3/8" G brass2
14 160671 Screw TCEI M10x254
15 880280 Screw TCEI M6x181
16 1520590 O-ring Ø 107,67x1,781 KIT 2525, KIT 2571, KIT 2793
17 1940500 Spacer1
18 780230 Washer1
18 1322940 Gear1
19 1321230 Gear1
20 1320960 Gear1
20 1320920 Flange1
20 1320930 Flange1
20 650920 O-ring Ø 53,65x2,621
21 640030 O-ring Ø 59,99x2,621 KIT 2525, KIT 2571, KIT 2793
22 780330 Screw TCEI M6x204
23 1341020 Washer4
24 180432 Screw TE M8x204
24 390450 Screw TE M8x304
25 1260100 Washer4
26 1320940 Flange1
27 961770 Spacer4
28 961900 Screw4
29 651000 Screw4
30 1382540 Spacer1
31 1382530 Plug1 KIT 2793
32 1320990 Gasket1 KIT 2525, KIT 2571, KIT 2793
33 1380630 Key1

Motor

A 4-pole motor of at least 0 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 63a4 0.121345IEC 63IE10.44  
RNM 63c4 0.181400IEC 63Single-phase1.5 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 63, 11 mm shaft (RN 63a4, RNM 63c4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 63, 11 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 11 mm motor shaft to the pump shaft.

Other Annovi Reverberi RK pumps

RK 11.14 N code 20630RK 11.20 H CRK 11.20 H NRK 11.25 H NRK 13.12 CRK 13.17 CRK 13.17 NRK 13.20 H CRK 13.20 H NRK 14.16 CRK 14.16 NRK 15.15 + F38RK 15.15 CRK 15.15 CR HONDA GX 270-QX code 20885RK 15.15 NRK 15.20 H CRK 15.20 H CR HONDA GX 270-QXRK 15.20 H NRK 15.25 H NRK 15.28 H NRK 18.12 CRK 18.12 NRK 18.16 H CRK 18.20 H NRK 18.28 H NRK 21.10 C code 20656RK 21.10 NRK 21.15 H C code 20657RK 21.15 H NRK 21.20 H N code 21129RK 24.10 NRK 24.15 H N